Define Mechanical Joint Allowable Pipe End Separation - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

Language
English
Product
Intergraph Smart 3D
Subproduct
Catalog
Search by Category
Help
Smart 3D Version
11 (2016)
  1. In the tree view, click Piping > Piping Specification > Piping Materials Classes.

  2. In the Piping Materials Classes branch, open a specification and click Piping Materials Class Rules > Mechanical Joint Allowable Pipe End Separation Rule.

  3. Click the Insert Row Command to insert a blank row in the grid view.

  4. In the Nominal Diameter From column, define the lower bound of the largest nominal piping diameter for which the end separation applies.

  5. In the Nominal Diameter To column, define the upper bound of the largest nominal piping diameter for which the end separation applies.

  6. In the Nominal Piping Diameter Units column, type the units for the NPD. For example, type mm or in.

  7. In the Pipe End Separation column, type the separation distance.

  8. Define the optional properties as needed.

The Mech Joint Allow Pipe End Separation sheet in the workbook corresponds to the Mechanical Joint Allowable Pipe End Separation Rule node. See Piping Reference Data.