Flush Frame Connections - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
11.x(2016)

The Flush node (the Flush sheet in the StructFrameConnections.xls workbook) defines the flush frame connections that are available. A flush frame connection uses the supporting member system's top and bottom extent to position the supported member. The supported member system typically lies within the body of the supporting member.

Name

Defines the name of the frame connection. This is the name that appears in the software when placing a member system in the model.

Definition

Specifies the flush frame connection definition macro.

Side

Select the side of the supporting member on which you want to place the supported member.

Offset

Specify the distance to place the supported member from the supporting member. For seated and flush frame connections, the offset is between the side of the supporting member that you specified with the Side option and the supported member's side that you specify with the Edge option. For centerline frame connections, the offset is between centerline of the supporting member and the supported member's side that you specify with the Edge option.

Edge

Specifies the side of the supported member's cross-section that is mated to the supporting member. You can specify Top, Right, Bottom, or Left. Edges of typical section shapes are shown in the figure.

Reflect

Specifies that Smart 3D reflects or mirrors the cross-section of the supported member about a plane perpendicular to the supporting member side. For example, when you place a supported member with an angle cross-section using the left edge option and you want the angle facing the other direction