Sets the settings that apply to a bill of material when you run Total, Single, or Cut
Schedule
-
Up
Places the bill of materials schedule in the upward direction with the column headings at the bottom.
-
Down
Places the bill of materials schedule in the downward direction with the column headings at the top.
-
Text Size
Specifies the size of the text in the bill of material schedule.
-
Spacing
Controls the spacing on the bill of material schedule.
Tags
-
Grid Factor
Controls the bill of material tag grid density on the drawing.
When you set Optimize to 2, you can set the Grid Factor to 0.5, 1.0, 2.0, or 3.0.
-
Optimize
Specifies the tagging algorithm used for the bill of material.
-
0
The tagging algorithm is off.
-
1
The algorithm is on, but does not stack any tags.
-
2
The algorithm is on, but only works on pipe.
-
Radius Factor
Controls the radius of tag bubbles. Bubbles are sized using this factor multiplied by the CAD platform setvar TEXTSIZE.
-
Spacing Factor
Controls how far bill of materials bubbles are spaced from the model or components within the drawing.
-
Weight and Area Precision
Controls the number of decimal places that display on the Bill of Material for both Weight and Area measurements.