CADWorx Structure tab: Model panel > Connections > Anchor Bolt
Places anchor bolts or holes in base plates.
Connection
Load a previously created anchor bolt template, or create and save a new anchor bolt template.
Hole
Row Count
Enter the number of bolt hole rows.
Row Spacing
Enter the distance between the bolt hole rows. The Row Count and the Row Spacing is centered on the plate.
Column Count
Enter the number of bolt hole columns.
Column Spacing
Enter the distance between the bolt hole columns. The Column Count and the Column Spacing is centered on the plate.
|
Diameter
Enter the diameter of the bolt hole.
Slotted Length
Enter a distance to create an elongated bolt hole. This distance is measured from the hole center.
Rotation
Enter the angle at which to rotate the bolt hole rows and columns within the end plate.
X Offset
Specifies the X-axis offset for the bolt holes. Bolt holes placed at zero offset are at the end plate center.
Y Offset
Specifies the Y-axis offset for the bolt holes. Bolt holes placed at zero offset are at the end plate center.
Anchor Bolt
Bolt Type
Specify the bolt type used in the clip connection.
Data Table
Specify the data table for the anchor bolts.
Bolt Size
Specify the size of the bolts.
Bolt Material
Specify the bolt material.
Rotation
Specify the angle of the anchor bolt.
Leg Direction
Specify the direction of the leg (outside, inside). This is used when you have a J bolt or L bolt.
Group
Specifies the assigned group. When you select a group from the list, the layer automatically updates to the layer assigned to that group. The groups that display in the Group list come from the Group Manager in the Structure Editor. For more information, see Group Manager in the CADWorx Structure Editor Users Guide.
Layer
Specifies the assigned layer. Layers default to the assigned group. However, you can change a layer as needed. The layers that display in the Layer list come from the Layer Manager in the Structure Editor. For more information, see Layer Manager in the CADWorx Structure Editor Users Guide.
Details
Long Description
Defines the long description for the anchor bolt.
Short Description
Defines the short description for the anchor bolt.
Part Number
Specifies the part number for the anchor bolt.
Tag
Defines the tag description of the anchor bolt.