Insert grating on support members - CADWorx - Help

CADWorx Structure

Language
English
Product
CADWorx
Subproduct
Structure
Search by Category
Help
CAESAR II Version
12
CADWorx Version
20.0 (2020)
CADWorx Structure Version
2020(4.0)

Show Me

  1. Open or create a model in CADWorx Structure.

  2. Click Area Objects on the Model panel.

    If you have opened all the palettes from the Model panel, you can switch between palettes with the available tabs.

    The Area Objects palette displays.

  3. Click Grating .

    The Grating palette displays.

  4. Select a Template.

    OR

    Fill in the data in each area as needed. For more information, see Grating.

  5. To show the grating in detail, select Show Detailed Grating.

  6. To turn off banding around openings or around the grating, clear Boundary Banding and Secondary Banding.

  7. Select Members from the Place By list.

  8. Click Insert.

  9. Select the support members in the 3D model where you want to place the grating.

  10. Press ENTER to finish.

    The grating places.

To place on a smaller section, do the following:

  1. Select Members from the Place By list.

  2. Click Insert.

  3. Select the support members in the 3D model where you want to place the grating.

  4. Press ENTER to finish.

    The grating places.

To hide the detailed grating for your shape, double-click the grating, clear the Show Detailed Grating check box, and then click Apply to show the grating as an extruded shape.