Bracket Rules - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Reference Data
Version_S3D
10.1(2014R1)

Determine bracket generation in the model.

Visual Basic Project: [Programming Resources Folder]\Programming\ExampleCode\StructDetail\SmartOccurrence\SMBracketRules\SMBracketRules.vbp

Compiled Rule: [Reference Data Folder]\SharedContent\Bin\StructDetail\SmartOccurrence\Release\SMBracketRules.dll

Bulkload: Bracket Workbook

The following selector class modules are included in the Visual Basic project:

RootBracketSel - The inputs to this selector rule are the supports, the order in which the supports were selected, and the plane from the model. This selector rule determines the number of supports and calls the appropriate sub-selector rule. This selector rule does not provide any questions.

  • Bracket2SSel - The inputs to this selector rule are the two supporting objects and the plane from the model. This selector rule provides options for selecting linear, curved, or curvilinear brackets. This selector class does not provide any questions. This selector rule is associated with the Bracket2S sheet of the bulkload workbook.

  • Bracket3SSel - The inputs to this selector rule are the three supporting objects and the plane from the model. This selector rule determines if the third support object is a plate or a profile and calls the appropriate definition rule. This selector class does not provide any questions. This selector rule is associated with the Bracket3S sheet of the bulkload workbook.

  • Bracket4SSel - The inputs to this selector rule are the four supporting objects and the plane from the model. This selector rule determines if the supporting objects are plates or profiles, and calls the appropriate definition rule. This selector class does not provide any questions. This selector rule is associated with the Bracket4S sheet of the bulkload workbook.

  • Bracket5SSel - The inputs to this selector rule are the five supporting objects and the plane from the model. This selector rule determines if the supporting objects are plates or profiles, and calls the appropriate definition rule. This selector class does not provide any questions. This selector rule is associated with the Bracket5S sheet of the bulkload workbook.

Similar class modules are included for brackets by plane (RootBracketByPlaneSel), brackets by plane with flanges (RootBracketByPlaneMTSel), and brackets by plane with reinforcement (RootBracketByPlaneMTSel2).

See Also

Structural Detailing Reference Data Workflow
Structural Detailing Rules