Web-penetrated Bottom Cuts - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Structural Detailing Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
10.1(2014R1)

All web cuts are available for both member assembly connections and generic assembly connections.

Name

Cross-
Sections Supported

Description

Parameters

Inside Hook Flange Relief Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Inside Hook Flange Relief Snipe Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Square Flange Relief Web Bottom Cut

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Square Flange Relief Web Bottom Cut Snipe

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Square Along Flange Relief Web Bottom Cut

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Square Along Flange Relief Web Bottom Cut Snipe

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Edge Hook Flange Relief Outside Web Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Edge Hook Flange Relief Outside Web Bottom Snipe

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Bottom Snipe Outside

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Bottom Snipe Outside Setback

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Outside Snipe Offset Web Bottom Cut

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Edge Hook Flange Relief Inside Web Bottom

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Bottom Outside Hook Flange Relief

All

Valid boundaries and orientations present a face and a bottom edge to the bounding member. The bounding member is still valid if it has a top edge.

Bottom Snipe Outside_Tube

Standard member to Tube

Standard member is bounded to a tubular member. This web cut is applicable to members with a bottom flange such as L and also to members without bottom flange such as T.