Cross Section Symbol HSSRs - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)

The HSSRs cross section symbol defines rectangular, hollow, structural sections with a seam indicator and uses the following properties.

Section Name

Type the section name. This name appears when you label members. The section name must be unique within the section standard.

Short Name

Type the short name for the section.

EDI Name

Type the Electronic Data Interchange name for the section. This name is used when translating sections through CIMsteel. This property is currently not used.

Group Id

Type the material group identification for the section.

Unit Weight

Type the weight of the section. The unit weight is defined in mass per length pound per foot (lbm/ft).

Area

Type the cross-section area for the section. The area is defined in square inches and square millimeters.

Depth

Type the overall depth of the section.

Width

Type the width for the section. The width is defined in inches or millimeters.

Perimeter

The outside perimeter distance for the section.

tnom

Type the nominal wall thickness of the section.

tdes

Type the design wall thickness of the section.

b_t

Type the width to thickness ratio of the section.

h_t

Type the height to thickness ratio of the section.

Ixx

Type the moment of inertia for the section's local x-axis.

Zxx

Type the plastic section modulus for the section's local x-axis.

Sxx

Type the section modulus for the section's local x-axis.

Rxx

Type the radius of gyration for the section's local x-axis.

Iyy

Type the moment of inertia for the section's local y-axis.

Zyy

Type the plastic section modulus for the section's local y-axis.

Syy

Type the section modulus for the section's local y-axis.

Ryy

Type the radius of gyration for the section's local y-axis.

J

Type the torsional moment of inertia for the section.

IsHollow

Specify if the cross-section is hollow or not. For this cross-section, the default value is True (1).

IsSymmetricAlongX

Specify if the cross-section is symmetrical along the local x-axis. For this cross-section, the default value is True (1).

IsSymmetricAlongY

Specify if the cross-section is symmetrical along the local y-axis. For this cross-section, the default value is True (1).

Has Seam

Specify if the cross-section has a seam indicator or not. For this cross-section, the default value is True (1).

Seam Angle

Specifies the location of the seam. This angle is measured clockwise from orientation vector of the member looking down the member from the start end.