Define Conduit Filters - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

Intergraph Smart 3D
  1. Click Grid View in the ribbon.

  2. In the tree view, click Conduit > Specifications > <spec name> > Conduit Filter.

  3. In the Short Code column, select a short code.

  4. In the First Size From, First Size To, and First Size Units columns, define the size range to which this filter applies.

  5. In the Contractor Commodity Code, specify the contractor commodity code.

  6. Click Save .

  • You must define the conduit nominal diameters before you can define the conduit filter. For more information, see Define Conduit Nominal Diameters.

  • For more information about each column on the Conduit Filter, refer to Conduit Filter.