Define Takedown Parts - Intergraph Smart 3D - Help

Intergraph Smart 3D Catalog

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
12.x(2018)
  1. In the tree view, click Piping > Piping Specification > Piping Materials Classes.

  2. In the Piping Materials Classes branch, open a specification and click Piping Materials Class Rules > Pipe Takedown Parts Rule.

  3. Click Insert Row to insert a blank row in the grid view.

  4. In the Take Down Short Code column, type the short code to use for this NPD if the user selects the Takedown option when placing a split.

  5. In the Weld Short Code column, type the short code to use for this NPD if the user selects the Weld option when placing a split.

  6. In the Pair Required column, define whether a pair is required. For example, flanges are used in pairs so you would set this column to Yes. Unions are not used in pairs so you would set this column to No.

  7. In the NPD column, type the NPD for which you are defining minimum values.

  8. In the NPD Unit Type column, type the units for the NPD. For example, type mm or in.

  9. In the Is Weld column, select Yes if the split or takedown joint is welded. Select No if it is not.

  10. Click Save .

  • The selected short code is passed to the Piping Commodity Filter and is used to help select the commodity code.

  • The Pipe Takedown Parts sheet in the Piping Specification.xls workbook corresponds to the Pipe Takedown Parts Rule node. For more information about the Piping workbooks delivered with the software, see the Piping Reference Data.