Approve pending changes - Intergraph Smart Materials - Version 2016 R4 (8.4.0) - Help - Hexagon PPM

Intergraph Smart Materials Help (2016)

PPMProduct
Intergraph Smart Materials
PPMCategory_custom
Help
Version_SPMat
2016 R4 (8.4)

If the DBA setting COMP_REG_AUTO_SYNC is set to N and if company data was updated, all changes on the company data that were made after the last login request approval are displayed on the Pending Changes tab.

Additionally, with the change of company data in the Portal, the approval sequence is automatically reset. This means, all Approved check boxes are cleared, and the changed company data has to be approved again.

  1. Select a company.

  2. Click Pending Changes tab.

    The approved data is displayed left and the updated data right. All changes are marked with .

  3. Review the changes.

  4. Scroll down and click Approval Sequence in the Approval section.

  5. Perform multi-step approval.