Instruments - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D Piping Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.x(2018)

There are two types of instruments that you can define and place in the software.

Catalog Instruments

Catalog instruments are similar to piping components. The selection of catalog instruments is driven by the Requisition Type, not by the tag number in Tag Number or Generic Tag Number. You define a tag number in the Instrument Class Data. You can then:

  • Define a commodity code and add that commodity code to Piping Commodity Material Control Data, just as you would a piping component. In this case the Requisition Type should be set to 5.

  • Not define a commodity code, but define in the Instrument Class Data all the properties such as the Short Material Description, Fabrication Type, Gasket Requirements, and Welding Requirements. In this case the Requisition Type should be set to 10.

  • Define the instrument parts in part classes.

Custom Instruments

Custom instruments are not defined in the Instrument Class Data and are either:

  • Read in from SmartPlant Instrumentation (INtools) from the SmartPlant integrated environment. The transfer is either based on the SmartPlant Instrumentation Group with each Group equal to a dummy part class name, or is defined completely by you in the model. The symbols are designed to communicate with the routing engine to drive the properties of the connection port to the instrument port.

  • You relate the part classes to the Custom Instruments node and then you browse to the instrument.

See Also

Instrument Class Data
Multiport Valve Operator Data
Piping Commodity Filter
Piping Commodity Material Control Data
Piping Commodity Procurement
Piping Materials Classes
Piping Specialty Class Data
Valve Operator Material Control Data