Assign labels - Intergraph Smart 3D - Help

Intergraph Smart 3D Isogen Isometric Drawings

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.1(2019)
Version_IConfig
6.0(2016)
Version_ICP
2.0(2016)
Version_ISOGEN
13.0(2016)

You assign labels to attributes within a drawing through Isogen Configuration. There are different types of labels that can be applied. The component note, the continuation note, and the nozzle note are used as examples below.

Isometric Component Note

  1. On the Home screen, select Label Mapping in the Smart3D category pane.

    The software switches to the Configuration View and displays the Label Mapping option groups on the Options panel.

  2. Expand Notes, and then click Show to display the Component Notes collection grid.

  3. Set the attributes for the new component note as needed. For example, select Pipe-Support from the list in the Part Type field.

  4. In the Label Name field, click the ellipsis button to open the Catalog Label dialog box. Select a label to use for the component note.

  5. To enclose the component note by a border or bubble, select an option in the Message Enclosure list.

  6. Click to update the isometric style file with the new property settings.

    You must have write permission to the reference data to save changes to an isometric style.

Continuation and Nozzle Note

  1. Select Label Mapping in the Smart3D category pane.

    The software switches to the Configuration View and displays the Label Mapping option groups on the Options panel.

  2. Expand Notes, and then click Show to display the End Connection Notes collection grid. The END-CONNECTION-EQUIPMENT and END-CONNECTION-PIPELINE entries are the labels that give you the nozzle notes and continuation notes.

  3. Make changes as needed.

  4. Click to update the isometric style file with the new property settings.

    You must have write permission to the reference data to save changes to an isometric style.

To enable recursive expansion of embedded labels, the report RFM file must set the ToParse flag to Yes, as in the following example:

    <DATA
     Column="ShortMaterialDescription"
     ToParse="yes"
     Visible="yes"/>