Marking Tab (Manufacturing Panel Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Manufacturing

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
11.x(2016)

Results

Specifies a manufacturing panel marking set from the list. This list is the same as the Marking List on the manufacturing panel ribbon. Clear the rule-based check box to select a different marking type.

Parameter

Displays the parameters for the selected marking set.

Value

Specifies modifiable marking values.

Rule-Based

Displays a check box if the value of the marking set is rule-based. Clear the check box and then select a different marking value if necessary.

Catalog Value

Displays the original catalog value for the marking if you modified the value.

Parameters

A manufacturing panel uses the same marking parameters as a manufacturing plate.

Manufacturing plate marking sets are rule-based and can be customized by facility.

When you select multiple objects, you can change the properties that those objects have in common. If the value of the property is the same for the objects that you have selected, that value displays in the ribbon bar. If the values are different, the box for that value is blank. Changing the value of a property makes that the value for all of the selected objects.

The following marking processes are considered to be included in the marking lists. This marking list is fixed and uses the codelist proposal of Yes/No values.

The rules for marking lines, and the symbols they place, are customizable. For example, you can customize the marking line rules to place marking lines at the left, right, or center of the connected part.

Marking Type

Comments

Plate Location

System generated parameter. This parameter marks the locations of the bounded plates.

Profile Location

System generated parameter. This parameter marks the location of stiffening profiles.

Collar Location

System generated parameter. This parameter marks the location of connected collar plates.

Bracket Location

System generated parameter. This parameter marks the location of connected bracket plates.

Lap Connection

System generated parameter. This parameter marks the location of lap connected plates.

End Connection

System generated parameter. This parameter marks the locations of end connected profiles.

Fitting Plate to Plate T Joint

Shipyards need to control the number of symbols, symbol type, and its parameters. Used for accuracy control when positioning connected parts.

Fitting Plate to Profile Penetration

Shipyards need to control the number of symbols, symbol type, and its parameters. Used for accuracy control when positioning connected parts.

Fitting Plate to Profile

Shipyards need to control the number of symbols, symbol type, and its parameters. Used for accuracy control when positioning connected parts.

Reference Planes Frame

System generated parameter. Displays the intersection of the plate and X-planes within the range of the plate.

Reference Planes WaterLine

System generated parameter. Displays the intersection of the plate and Y-planes within the range of the plate.

Reference Planes Buttock

System generated parameter. Displays the intersection of the plate and Z-planes within the range of the plate.

Block Control

User marking. Displays marks for accuracy control.

Seam Control

User marking. Displays marks for accuracy control.

Template Location Lines

System generated parameter. Marks the locations of templates.

Base Control Line

System generated parameter. Marks the location of template base control lines.

Roll Lines

System generated parameter. Marks the roll on a curved plate.

Knuckle Lines

System generated parameter. Marks the location of a knuckle.

Naval Architect Lines

System generated parameter. Marks the naval architect lines, such as flat-of-side or flat-of-bottom.

Roll Boundaries

System generated parameter. Marks the start and end of a roll on a curved plate.

Ship Direction

System generated parameter. Tick marks showing the global orientation of the plate.

Diagonals

System generated parameter. Displays the diagonals of the plate.

Robot Mark

System generated parameter. Displays robot marks generated with the User defined marking line option of the Marking command.

Painting Line

System generated parameter. Displays painting lines generated with the User defined marking line option of the Marking command.

Mark (ship name)

User marking. Marks the ship name of the plate.

Plate Edge Check Lines

System generated parameter. Displays marks near the plate edge for accuracy control.

Web Frames Check Lines

System generated parameter. Displays marks near the plate edge connected to the hull for accuracy control.

Bridge

This parameter is not currently used.

Feature Tab

This parameter is not currently used.

Welding Tab

This parameter is not currently used.

Bending Control Line

System generated parameter. Displays the bending control lines generated in the unfold process.

Margin

System generated parameter. Displays the pre-margin contour. For a negative margin, this lies outside the final plate contour and is not marked.

User Defined

User marking. Displays user-defined markings.