Marking Tab (Tube and Edge Template Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Structural Manufacturing

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
Version_S3D
11.x(2016)

When you select multiple objects, you can change the properties that those objects have in common. If the value of the property is the same for the objects that you have selected, that value displays in the ribbon bar. If the values are different, the box for that value is blank. Changing the value of a property makes that the value for all of the selected objects.

User Answers

Select a template process type from the list. This list is the same as the Process list on the Template ribbon.

Parameter

Displays the parameters for the process that you have selected.

Value

You can modify the parameter values if necessary.

Rule-Based

If the value of the parameter is rule-based, a check box displays. You can clear the check box and then select a different parameter value if necessary.

Catalog Value

If you modified the value, the original catalog value for the process displays.

BaseCtlLineMark

Creates a mark on the top line of the template at some distance from the top base control line.

FittingMark

Creates fitting marks. This option only applies to tube templates.

FrameMarks

Creates marks of intersecting frames.

QuarterLineMarks

Creates quarter line marks. This option only applies to tube templates.

SeamMarks

Creates seam marks.

ShipDirectionMark

Creates ship direction marks.

CustomMark

Creates custom marks.

See Also

Tube and Edge Templates Properties Dialog Box