Scenario 2: Loops - Intergraph Smart P&ID - Help - Intergraph

Intergraph Smart P&ID Drawing Manager Help (2019)

PPMProduct
Intergraph Smart P&ID
PPMCategory_custom
Help
SPFVersion_custom
Version_SPEL_custom
2019 (9.0)
Version_SPPID_custom
2019 (9.0)
Version_SPEM_custom
2019 (10.0)
Version_WebSPID
(none)

The following workflow demonstrates using shared items in a connected Workshare collaboration using projects.

1

The Plant creates Drawing A and places 3 DCS instruments.

2

Project 1 checks out Drawing A and creates the following loops:

P-100 in the drawing stockpile

P-101 in plant stockpile (shared = False)

P-102 in plant stockpile (shared = True)

Project 1 verifies via the EDE that there are 3 DCS instruments and 3 loops in the drawing.

3

Project 1 closes Drawing A.

Drawing A becomes Drawing A'.

4

Project 2 fetches (with read/write permissions) Drawing A' from Project 1.

Project 2 opens Drawing A' and verifies via the EDE that P-100 is in the drawing stockpile and that there are 3 DCS instruments, then closes Drawing A'.

Project 2 assigns ownership of Drawing A' to Satellite 2.1 and synchronizes shared items.

5

Satellite 2.1 executes Get Latest Version from Remote command and synchronizes shared items.

Satellite 2.1 opens Drawing A' and verifies via the EDE that P-100 is in the drawing stockpile and that there are 3 DCS instruments, then closes Drawing A'.

6

Project 1 assigns ownership of Drawing A' to Satellite 1.1 and synchronizes shared items.

Satellite 1.1 executes Get Latest Version from Remote command and synchronizes shared items.

Satellite 1.1 opens Drawing A' and verifies via the EDE that P-100 is in the drawing stockpile and that there are 3 DCS instruments, then closes Drawing A'.

7

Satellite 1.1 creates Drawing B and places an instrument. Drawing B becomes Drawing B'.

8

Satellite 1.1 opens Drawing B', verifies via the EDE that only the P102 loop tag is available for assignment (confirming that synchronizing shared items brought the loop over to the satellite), then closes Drawing B'.

9

Satellite 2.1 creates Drawing C and places an instrument. Drawing C becomes Drawing C'.

10

Satellite 2.1 opens Drawing C', verifies via the EDE that only the P102 loop tag is available for assignment (confirming that synchronizing shared items brought the loop over to the satellite), then closes Drawing C'.

11

Satellite 1.1 assigns ownership of Drawing A' to Project 1 and synchronizes shared items.

12

Project 1 executes Get Latest Version from Remote command and synchronizes shared items.

Project 1 opens Drawing A' and verifies the following via the EDE:

P-100 in the drawing stockpile

P-101 in plant stockpile (shared = False)

P-102 in plant stockpile (shared = True)

3 DCS instruments

Project 1 closes Drawing A' and then checks Drawing A' into the Plant.

13

The Plant opens Drawing A' as read-only and verifies via the EDE that P-100 is in the drawing stockpile and that there are 3 DCS instruments.

See Also

Projects vs. Workshare