Create an Analog Output I/O Card and a 4-Channel Terminal Strip within the New Reference DCS Panel - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

PPMProductFamily
Engineering and Schematics
PPMProduct
Intergraph Smart Instrumentation
PPMCategory
Training
Version_SPI_custom
2018 (12.0)

After creating the required racks and slots in the new reference DCS panel, you can now create an analog output I/O card.

  1. In the Reference Explorer, expand the panel DCS-1 to display all its child items.

  2. Under File Number 1, right-click Slot 2 and then on the shortcut menu, click New > I/O Card.

  3. On the New Wiring Equipment dialog box, type the new I/O card name
    4 CHANNEL A/O CARD and click OK.

  4. On the Wiring Equipment Properties – I/O Card dialog box, on the General tab, accept the I/O card name.

  5. Click the Control System tab and from the I/O type list, select AO.

  6. Click OK to complete the creation of the new I/O card.

  7. Right-click the new I/O card 4 CHANNEL A/O CARD and on the shortcut menu, click New > Terminal Strip.

  8. On the Terminal Strip Configuration dialog box, next to Configuration name click New.

  9. On the Number of Terminals in Pattern dialog box, type 3 and click OK.

  10. Define the terminal configuration as shown below .

  11. Define the Terminal Numbering Pattern as shown below.

  12. Click Save and then Create.

  13. On the Terminal Strip Properties dialog box, under Terminal strip, type TS 4 CHANNELS and click OK.

    The Reference Explorer should now display the following items in the DCS Panels folder: