Modify Properties of Items from the Enhanced Report Utility - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

PPMProductFamily
Engineering and Schematics
PPMProduct
Intergraph Smart Instrumentation
PPMCategory
Training
Version_SPI_custom
2018 (12.0)
  1. In the Enhanced Report Utility, select the upper wire that is connected to the device panel for tag 101-FT-100, as shown.

  2. Do one of the following:

    • On the Actions toolbar, click .

    • Click Actions > Item > Properties.

      If not done automatically, switch back to Smart Instrumentation.

  3. On the Wire Properties dialog box, from the Color list, select Yellow.

  4. Click OK to return to the Enhanced SmartLoop report.

    The wire color value is not updated at this stage.

  5. Now position the cursor over cable C-101-FT-100 and repeat the previous steps to change the cable name to DEMO CABLE.

  6. To update the modified data values, on the Actions toolbar, click Refresh ().

    If the Refresh command is not enabled, click a blank region of the drawing sheet first.

    The Enhanced Report Utility regenerates the loop drawing with the updated data values:

  7. Restore the properties that you changed to their original values and refresh the report again.