Create a Plant Junction Box - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

Intergraph Smart Instrumentation Tutorial

PPMProductFamily
Engineering and Schematics
PPMProduct
Intergraph Smart Instrumentation
PPMCategory
Training
Version_SPI_custom
2018 (12.0)
  1. Make sure that both the Domain Explorer and the Reference Explorer are open side by side. (Press F7 to open the Domain Explorer and F8 to open the Reference Explorer.)

  2. In the Domain Explorer, expand the Panels by Category folder to display the Junction Boxes folder.

  3. In the Reference Explorer, expand the Panels folder.

  4. In the Reference Explorer, expand the Junction Boxes folder and then click junction box 16 INSTRUMENTS WITH I/S.

  5. Drag this junction box to the Junction Boxes folder under the Panels by Category folder in the Domain Explorer.

    When you release the mouse button to drop the junction box in the Domain Explorer, the software opens the Junction Box Properties dialog box.

  6. On the Junction Box Properties dialog box, under the Panel field, type 101-JB-DCS-001 and click OK to close the dialog box.

  7. In the Domain Explorer, expand junction box 101-JB-DCS-001. Note that it contains the same sub-items as in the junction box that you created in the Reference Explorer.

  8. Right-click terminal strip 16 inst+ind. shield, and select Properties on the shortcut menu to open the Terminal Strip Properties dialog box.

  9. In the Terminal strip field, type TS-1 over the existing terminal strip name and click OK.

    The renamed terminal strip appears in the Domain Explorer as shown: