General Tab (Cableway Turn Transition Feature Properties Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.1(2019)

Displays and defines the general properties of the selected transition.

Standard

Cableway

Specifies the name of the cableway associated with the transition feature. You can select another run from the list if necessary.

<Load More Runs> loads all the runs that belong to the parent system. This option is not available after you load all the runs, or if the parent system contains less than 200 runs.

More displays the Select Cableway dialog box. Use this option to select a cableway that is associated with a different electrical system. For more information, see Select Cableway Dialog Box.

Specification

Displays or defines the cableway specification from a list of allowed specifications for the associated system. Specifications are assigned to systems in the Systems and Specifications task.

Transition Type

Displays the type of the transition, such as parallel.

Part

Displays or defines a part associated with the transition, if applicable.

Throat Radius

Displays or defines the throat radius of the transition. The list displays the last ten radii that you entered. This box appears for turn transitions only.

Angle

Displays or defines the angle of the transition. This box appears for turn transitions only.

Fill Information

Percent Fill

Displays or defines the percent cable fill in the cableway feature.