Multi-Route Tab (New Cableway Dialog Box) - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.1(2019)

Displays and defines properties for routing multiple, parallel cableway systems.

Mode

Designates the mode of parallel routing: Along Depth or Along Width. The Along Depth mode creates stacked cableways, and the Along Width mode creates side-by-side cableways.

Along Depth Mode

Cableways Above Master Run

Type the number of cableways to be routed above the master run.

Cableways Below Master Run

Type the number of cableways to be routed below the master run.

Vertical Distance Between Trays

Type the vertical distance between the parallel cableways.

Modeling of Riser Sections

Specifies either constant spacing or constant leg length in riser sections. In the current version, this setting is Maintain Constant Spacing and cannot be changed.

Along Width Mode

Cableways to Left of Master Run

Type the number of cableways to be routed to the left of the master run.

Cableways to Right of Master Run

Type the number of cableways to be routed to the right of the master run.

Horizontal Distance Between Trays

Type the horizontal distance between the parallel cableways.

Modeling of Skewed Sections

Specifies either constant spacing or constant leg length in skewed sections. In the current version, this setting is Maintain Constant Spacing and cannot be changed.

See Also

Route Multiple, Parallel Cableway Runs