Move a set of cableway features - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.1(2019)
  1. Click Select on the vertical toolbar.

  2. In the Locate Filter, select Cableway Features.

  3. Select a feature on the cableway section to move.

  4. Right-click the feature, and select an option under Get Features. For more information, see Route Selection Commands.

  5. Click Move on the main ribbon.

    If you move the cableway end within ΒΌ inch (6.35 mm) of another cableway end, the software automatically connects the two ends.

  6. Select a move-from point.

  7. Identify the move-to point, and click the graphic view to confirm the new location.

    The software moves the cableway run to the new location.

For more information on how the software performs the move operation, see Appendix: Moving at Boundary Connections.

Connect a Set of Cableway Features

  1. Click Select on the vertical toolbar.

  2. In the Locate Filter, select Cableway Features.

  3. Select a feature in the cableway section to modify.

  4. Right-click the feature, and select an option under Get Features. For more information, see Route Selection Commands.

  5. Click Move on the main ribbon.

  6. Click an end feature in the selection.

  7. To connect the selection to another cableway inline, click an open end feature.

    -OR-

    To connect the selection to another cableway at a branch point, click a straight feature.

The software will lengthen or shorten the cableway length as needed to make the connection. For more information, see Connecting cable trays or cableways using Move.