Route conduit with an external offset - Intergraph Smart 3D - Help

Intergraph Smart 3D Electrical

PPMProduct
Intergraph Smart 3D
PPMCategory_custom
Help
SPFVersion_custom
2019 (10.0)
Version_S3D
12.1(2019)
  1. Click Route Conduit .

  2. Select the run starting point.

  3. Define the conduit properties on the New Conduit Run Dialog Box, and then click OK.

  4. Route towards the object you want to offset from.

  5. From the Offset option, select Set Offset Reference.

  6. Select External from the Offset Reference Type grouping.

  7. On the Set Offset Reference dialog box, select the option to use from the Measured from field.

  8. Type the offset distance to use in the Offset box.

  9. Click OK on the Set Offset Reference dialog box.

  10. Move the pointer over the object in the model from which you want to measure the offset until the object is added to the SmartSketch3D locate list.

  11. Move the pointer until the offset glyph appears, and then click to route the run.

  12. Select the ending point of the run. Right-click to end a run that does not terminate in a nozzle or branch.