FlatOval_Rivet Sheet - Intergraph Smart 3D - Reference Data

Intergraph Smart 3D HVAC Reference Data

PPMProductFamily
3D Design and Visualization
PPMProduct
Intergraph Smart 3D
PPMCategory
Reference Data
Version_S3D
12.1(2019)

The FlatOval_Rivet sheet in the HVAC.xls workbook defines the flat oval rivets that you want in the Catalog.

PartNumber

Type the part number for the rivet. An example is FlatOvalRivet for flat oval rivet.

Part numbers for flat oval rivets must be unique throughout the entire Catalog.

FaceDepth

Type the face depth for the object.

FaceWidth

Type the face width for the object.

ComponentType

Type the component type for the rivet.

PartDescription

Type a description for the rivet.

SymbolDefinition

Type the symbol definition for the rivet.

Width

Type the width of the duct.

Depth

Type the depth of the duct.

For the remaining properties, (i) indicates an integer corresponding to a nozzle number assigned to the cross section. This method avoids a lengthy listing for all possibilities, like Nozzle(1):CrossSection, Nozzle(2):CrossSection, and Nozzle(3):CrossSection for three possible nozzles. When you type the nozzle properties in the workbook, substitute a number for i to assign the nozzle to the appropriate property.

Nozzle(i):CrossSection

Type the related CrossSection object for the port.

Nozzle(i):EndPrep

Type the coded end preparation for the nozzle. Examples of end preparations include Threaded, Screwed, Plain End, Welded, Bolted, Female, Male, and Ferule. In the reference data, a number represents each type of end preparation (for example, 1 for Threaded, 2 for Screwed and so on).

Nozzle(i):Thickness

Type the thickness of the nozzle port.

Nozzle(i):FlangeWidth

Type the sleeve width for the nozzle.

Nozzle(i):FlowDirection

Type the flow direction for the nozzle.

Nozzle(i):PortDepth

Type the depth of the port for the nozzle.

Nozzle(i):CptOffset

Type the offset value for the component.