Create a drawing using the default style - CAESAR II - Help

CAESAR II Users Guide

Language
Русский
Product
CAESAR II
Search by Category
Help
CAESAR II Version
12

You can use different drawing styles A drawing style is a set a parameters that you define to represent your piping system drawing. These parameters typically include drawing format, drawing size, drawing frame, units, and options to display other information like materials list, weld list, and so on. to create a drawing. Using the Isometric Drawing Generation dialog box, you can select a style or create a new style. Selecting the default style to create a drawing applies a predefined set of styles and rules to the drawing. Use this option if you are not familiar with the drawing styles or if you do not want to create a custom drawing style.

To create a drawing using the default style:

  1. Select File > Open to open a model.

  2. On the Home tab, click Generate Stress Isometrics to open the model in the C2Isogen module.

  3. Select Create Isometric Drawing in the Isometric Tools toolbar to open the Isometric Drawing Generation dialog box.

  4. Select Use Default Style, and then click OK to create drawings.

    The Drawings dialog box displays a list of drawings created for the piping model and reports errors generated during drawing creation.

  5. Select the drawings to view, and then click View to open the drawings in your default viewer.

  • Select Generate PDF Files to create a .pdf file of the drawings in addition to the .dwg file.

  • The software saves .dwg drawing files and .pdf files in the same folder as the piping model.

  • By default, the software uses the pipe model unit system in the drawing.

  • You cannot make any changes to the default drawing style.