Hanger Design Control Data - CAESAR II - Help

CAESAR II Users Guide

Language
Русский
Product
CAESAR II
Search by Category
Help
CAESAR II Version
12

Piping Input menu: Model > Hangar Design Control Data

Input Tools toolbar: Hangar design criteria

Shortcut key: CTRL+H

Specifies global spring hanger design criteria for the model.

Hanger Design Control Data Dialog Box

The Hanger Design Control Data dialog box contains data that also displays for each hanger in your model. The software populates values you specify in this dialog box on the individual Hangers tab in the Piping Input auxiliary panel. However, you can override those values on a hanger-by-hanger basis.

You can globally specify the following properties:

No. of Hanger Design Operating Load Cases

Calculate Actual Cold Loads

Allow Short Range Springs

Allowable Load Variation (%)

Rigid Support Displacement Criteria

Maximum Allowed Travel Limit

Hanger Table

Multiple Load Case Design Option

  • For examples of incorporating spring hanger designs into your models, see Hangers in the CAESAR II Application Guide.

  • For more information on how CAESAR II selects hangers, see Hanger Sizing Algorithm