Load Case - CAESAR II - Help

CAESAR II Users Guide

Language
Русский
Product
CAESAR II
Search by Category
Help
CAESAR II Version
12

Specifies the static or dynamic load case to be included in the combination case. Select a load case from the list. Static load cases start with S, and dynamic load cases are start with D. Each is then followed by a load case number of a static or shock analysis defined on the Load Cases tab. For more information, see Spectrum/Time History Load Cases Tab.

The following examples are valid values: S1, STATIC1, S3, STATIC3, D1, DYNAMICS1, S#1, and D#1. Use any length up to 24 characters. For static load case definitions, the static case must exist and have already been run (also, the S can’t refer to a spring hanger design case). For dynamic load case definitions, the dynamic load case number refers to the shock load case.