Add a new material to the database - CAESAR II - Help

CAESAR II Users Guide

Language
Русский
Product
CAESAR II
Search by Category
Help
CAESAR II Version
12

When adding a new material to the database, you must add at least two records in the Material Database Editor. The first record saves the new material for the All Codes option. CAESAR II uses the All Codes option to populate the Material list in the Classic Piping Input dialog box. Enter all the material information except for the allowable stresses. You can add subsequent records for the same material to address additional piping codes and identify the allowable stresses for each piping code.

  1. In the Material Database Editor, click Clear Screen to Add .

    The software saves any data currently shown in the editor window, and then clears the window contents.

  2. Enter the required data for the new material, except for the allowable stresses. At a minimum, you must specify the Number and select All Codes in the Applicable Piping Code list.

    You must enter a number that is less than 1000. If you enter a number that currently exists in the database, the software prompts you to enter a different number.

  3. Click Save Material to save the new material.

  4. After you save the new material, you can add subsequent new material records to modify the piping code and define the allowable stresses. Select the Applicable Piping Code for the new material. Then, specify the allowable stresses.

  5. Click Save Material to save the new material in the Piping Input processor. Repeat steps 4 and 5 to add new material records for each piping code that you need.

  6. Close the Material Database Editor dialog box, and open the Classic Piping Input dialog box for the current job.

    CAESAR II displays the new material as an option in the Material list on the Classic Piping Input dialog box.