Allows for a global override of point cloud coloring. Initial point cloud coloring can be replaced by true color or intensity mapping (if available).
Options
Color Mapping - Select one of the following settings:
-
No Override to display each point cloud using its own setting or layer override.
-
Intensity Mapping to display all point clouds with intensity-mapped colors. If intensity data is not available, CloudWorx attempts to use true color data (if available), then a single color.
-
True Color to display all point clouds with true color obtained by the scanner. If true color data is not present for a point cloud, the point cloud uses intensity data (if available), then a single color.
-
Appearance to display point clouds with the specified color settings.
Color Scheme - Displays the intensity map for the corresponding color mode. You can select Grayscale, Multi-Hue, or a scaled individual color.
Intensity Mapping Parameters - Specifies values that correspond to the range from dark to bright. For the Multi-Hue setting, the values correspond to ranges from red through yellow and green to blue. The Minimum and Maximum settings typically range from 0 to 1. When the mode is Image Texture Map, Colors from Scanner, or Intensity Map, you can set the following:
-
Minimum - Specifies that the lowest intensity value be mapped to the low end of the selected color scheme.
-
Maximum - Specifies that the highest intensity value be mapped to the high end of the selected color scheme.
-
Actual - Displays the original object minimum and maximum intensity values.
Change point cloud color mapping
-
Select CloudWorx > Color Mapping.
The Point Cloud Color Mapping dialog displays.
-
Select the required option from the Color Mapping list. If Intensity Mapping is chosen from the Color Mapping list, select a mapping Color Scheme, and then adjust the intensity mapping range if needed.
-
Select the required color scheme from the Color Scheme list.
Quick commands related to color mapping
-
Point Rendering > Intensity Mapping: Turn on global color mapping mode as Intensity Mapping with current parameters.
-
Point Rendering > Color From Scanner: Turn on global color mapping mode as True Color.