The following features and functionalities are enhanced in the Hangers and Supports in SDB 12.2.
Grout, Stiffeners, and Anchor Bolts added to Box Frame Support
Created a new box frame support with grouts, stiffener, and anchor bolts. The box frame can now be placed on slabs using grout and on structures with stiffeners.
End Cross Member of Box Frame needs to be optional
End cross member is now optional for a box frame with changes, and the two cross members are also optional. You can set any one of the members as optional and meet your requirements.
Braced cantilever requires a new brace offset definition
The cantilever has a new brace offset definition, and using this option, you can measure brace offset inside the edge of the brace.
Ability to rotate cantilevers support on sloped pipe
Cantilevers support can be placed in non-linear configurations. When pipes create angles with structures, the cantilever can be placed in two ways - perpendicular to pipes and perpendicular to structures.
Base support type3 lacks change configuration functionality
Base support type3 has new configuration with the toggle connection. The lug length attribute is implanted and kept in occurrence. Lug length can be modified spontaneously.
Stanchion and Dummy supports with grout and base plate
Dummy leg and Stanchion supports have the flexibility to change the grout thickness and base plate thickness.
Ability to rotate ‘L section’ trunnion in case of a combined support
Using Trunnion Angle, L section can be rotated to the desired angle.