CADWorx Interface for Piping content in SDB - Intergraph Smart Reference Data Standard Database - Version 12.3 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Help

Language
English (United States)
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.3

Infrastructure for the Smart Reference Data SDB - CADWorx interface is provided with SDB. The interface is configured to export 21 Process Industry Practices (PIP) sample specifications for CADWorx..

Pre-configured piping specifications

The below listed specifications are pre-configured for CADWorx interface:

Spec Name

Size Range

Material Description

1SA0S01

1/2"- 48"

Class 150, 304/304L Stainless Steel, Socket Weld, 0.000" C.A. Process

1CA1S01

1/2"- 48"

Class 150, Impact Tested Carbon Steel, Socket Weld, 0.063" C.A. Process

3CJ1S01

1/2"-24"

Class 300, 1-1/4 CR - 1/2 MO, Socket Weld, 0.063" C.A. Process

9CS1S01

1/2"-24"

Class 900, Carbon Steel, Socket Weld, 0.063" C.A. Steam/Condensate

6CB2S01

1/2"- 48"

Class 600, Killed Carbon Steel, Socket Weld, 0.125" C.A. Process

1FE0A01

1"-16"

150 PSI, Glass Fiber Reinforced Epoxy (RTR), Adhesive, Process and Utilities

1LT0F01

1"-12"

Class 150, Flanged, PTFE-Lined Carbon Steel Process

15SK0S01

1/2"-24"

Class 1500, 321H Stainless Steel, Socket Weld, 0.000" C.A. Process.

PP - Schedule 80 - Butt Fusion

1/2"-12"

PP - Schedule 80 - Butt Fusion

HDPE - SDR 11 - Butt Fusion

4"-24"

High Density Polyethylene (HDPE) - SDR 11 - BUTT FUSION

12LB0M01

3"-24"

Class 175, Ductile Iron, Mechanical Joints, Cement-Mortar Lined Fire Water (UL/FM Approved) (Underground)

15SD0S01

1/2"-24"

Class 1500, 316/316L Stainless Steel, Socket Weld, 0.000" C.A. Process

1CS1S01

1/2"- 48"

Class 150, Carbon Steel, Socket Weld, 0.063 C.A. Process

1SD0J01-C

1/2"-14"

Class 150, 316/316L Stainless Steel, Jacketed Construction,0.000 C.A. Process

1SD0J01-J

1/2"-16"

Class 150, 316/316L Stainless Steel, Jacketed Construction,0.000 C.A. Process

3CS1S01

1/2"- 48"

Class 300, Carbon Steel, Socket Weld, 0.063 C.A. Process

50SD0L01

1/4"- 3/4"

316/316L Stainless Steel, Tubing Compression, 0.000 C.A., Process Tubing, (thru ASME Class 600 Piping)

6CS1S01

1/2"- 48"

Class 600, Carbon Steel, Socket Weld, 0.063 C.A. Steam/Condensate

CPVC - Schedule 80 - Solvent Cemented

1/2"- 8"

Chlorinated Poly (Vinyl Chloride) (CPVC), Cement, 0.000" C.A. Process.

HDPE - FM - Class 150 - Butt fusion

4"-24"

FM Class 150, High Density Polyethylene (HDPE), Heat Fusion, Fire Water (UL/FM Approved) (Underground).

PVC - Schedule 80 -Solvent Cemented

1/2"- 8"

Poly (Vinyl Chloride) (PVC), Cement, 0.000" C.A. Process

CADWorx Export Job Settings

Project discipline default setting ‘ZO_CDWX_VR’ is provided to select the version of CADWorx. Data will be exported based on this setting value as below:

  • Exports set with CADWorx 2014 version will not export "Materialmgmtident.lst" file.

  • Exports set with CADWorx 2015 version will include "Materialmgmtident.lst" file, but no data will be exported in ‘Description’ field.

  • Exports set with CADWorx 2016 version will export the data in ‘Description’ field of "Materialmgmtident.lst" file.

  • Exports set with CADWorx 2017R1 - 2018 version will export the user specific custom data in custom attribute fields of "Customfieldtable.lst" file

  • Exports set with CADWorx 2019-2020 version to export the version specific data.

Defining Custom Attributes for CADWorx in SDB

The necessary configurations required for exporting data with custom attributes has been provided in the SDB CADWorx interface.

Below are the required configuration changes:

  1. Add new sheet "CustomFieldTable" as general list in Integration > CADWorx > CADWorx Configuration > Data Tables screen in Smart Reference Data Plus.

  2. Add all the necessary attributes in Integration > CADWorx > CADWorx Configuration > Attributes screen in Smart Reference Data Plus.

  3. Add new sheet "CustomFieldTable" in sheet configuration and configure all the required attributes in Integration > CADWorx > CADWorx Configuration > Data Table Configurations screen in Smart Reference Data Plus. Use TEMPLATE_COPY as retrieval method.

  4. Also, update sheet configuration of spec and part sheets to include custom attributes.

  5. Add custom attribute metadata in Integration > CADWorx > CADWorx Configuration > Templates screen in Smart Reference Data Plus.

  6. Ensure that sheet "CustomFieldTable" is added in the export job.

Sheet Configurations

SDB has provided SDB_CDWRX_SHT_CONF for CADWorx piping specs. This configuration must be used for exporting SDB delivered CADWorx content data from SDB.

Item Mappings

SDB has provided SDB_CDWRX_ITEM_MAP for CADWorx piping specs. This mapping must be used for exporting SDB delivered CADWorx content data from SDB.

Transfer Type

SDB has provided SDB_CDWRX_SHEETS for CADWorx piping specs. This transfer must be used for exporting SDB delivered CADWorx content data from SDB.

Templates

SDB has provided SDB_CDWRX_TEMPLATE for CADWorx piping specs. This template must be used for exporting SDB delivered CADWorx content data from SDB.

Sample Export Jobs

The following sample jobs are provided for exporting the CADWorx specifications from CADWORX 20.01 Export Jobs screen in SDB:

SDB_EXP_15SK1S01: Sample job for exporting 15SK1S01 spec.

SDB_EXP_1CA1S01: Sample job for exporting 1CA1S01 spec.

SDB_EXP_1FE0A01: Sample job for exporting 1FE0A01 spec.

SDB_EXP_1LT0F01: Sample job for exporting 1LT0F01 spec.

SDB_EXP_1SA0S01: Sample job for exporting 1SA0S01 spec.

SDB_EXP_3CJ1S01: Sample job for exporting 3CJ1S01 spec.

SDB_EXP_6CB2S01: Sample job for exporting 6CB2S01 spec.

SDB_EXP_9CS1S01: Sample job for exporting 9CS1S01 spec.

SDB_EXP_PP_SCH80: Sample job for exporting PP-SCHEDULE80-BUTTFUSION spec.

SDB_EXP_HDPE_SDR11: Sample job for exporting HDPE-SDR 11-BUTT FUSION spec.

SDB_EXP_12LB0M01: Sample job for exporting 12LB0M01 Spec.

SDB_EXP_15SD0S01: Sample job for exporting 15SD0S01 Spec.

SDB_EXP_1CS1S01: Sample job for exporting 1CS1S01 Spec.

SDB_EXP_1SD0J01-C: Sample job for exporting 1SD0J01-C Spec.

SDB_EXP_1SD0J01-J: Sample job for exporting 1SD0J01-J Spec.

SDB_EXP_3CS1S01: Sample job for exporting 3CS1S01 Spec.

SDB_EXP_50SD0L01: Sample job for exporting 50SD0L01 Spec.

SDB_EXP_6CS1S01: Sample job for exporting 6CS1S01 Spec.

SDB_EXP_CPVC-SCH80: Sample job for exporting CPVC-Schedule 80- Solvent Cemented Spec.

SDB_EXP_HDPE-FM-150: Sample job for exporting HDPE-FM-Class 150-Butt fusion Spec.

SDB_EXP_PVC-SCH80: Sample job for exporting PVC - Schedule 80 - Solvent Cemented Spec.

CADWorx Export Data Post processor

A new tool, SRDExportedCADWorxData - PostProcessor.exe, is added to the existing family of SDB tools. This is a post-processor utility to modify the SDB exported Cadworx specifications data before it is loaded into the Cadworx. The operations performed by the utility on the .cspx files are as follows:

  • Removes whitespaces from description attributes

  • Capitalizes the description attributes

The user can select both the above options or any one.

Tool Location: The SRDExportedCADWorxData - PostProcessor.exe is delivered as part of SDB and is found at:

<SDB Installation Location>\Cadworx_Utility\SRDExportedCADWorxData - PostProcessor.exe.

CADWorx interface- Additional information

  • In Smart Reference Data, bolt part numbers are assigned by Bolt Diameter and Bolt Length. CSPX files exported from Smart Reference Data have all the bolts, with part number, sorted by Bolt Diameter and Bolt Length.

  • CADWorx DBCode table does not have Bolt Diameter and Bolt Length attributes, it only has MAINZISE and REDSIZE attributes. CADWorx assigns the DBCode part number based on the flange MAINSIZE even for bolts. So, there is no way for the user to have bolts coming in from Smart Reference Data assigned in the CADWorx model by the Bolt Diameter and Bolt Length.

  • This limitation in CADWorx-DBCode table can be handled by adding two new attributes ‘BOLT_LEN’ and ‘BOLT_DIA’ after the attribute ‘DBCODE_TABLE’ in MaterialsMgmtIdents.lst file.

  • In the exported MaterialsMgmtIdents.lst file the two new attributes ‘BOLT_LEN’ and ‘BOLT_DIA’ after the attribute ‘DBCODE_TABLE’ are exported in as shown below:

  • When the CSPX files has been updated with BOLT_DIA and BOLT_LEN, the user can then import the CSPX file and then both of those fields are added in DBCode table as Custom data. The user needs to select the separate catalog option when the user runs the import to edit a separate catalog for the BOLT values.

  • User can then manually edit the component Long Description in the SPRD to add the key work for Bolt Length and Bolt Diameter

  • When a bolt is placed in the model, with PTN set by DbCode and the DbCode table has the BOLTLEN and BOLTDIA fields with the values for the placed bolt, then the PTN lookup is performed by BOLTLEN and BOLTDIA match.

  • Orifice flanges referred in the CADWorx specifications with group and part FOW are mapped to the FlgWeldNeck.lst file for all the specifications. Updated the retrieval sources for the attributes OTD (Orifice Tap Diameter), OTA (Orifice Tap Angle) and OTN (Orifice Tap Number). Updated the CADWorx generic data and End type tables for the required orifice flanges referred in the specifications.