Base Plate 1 and Bolt 1 Properties - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

The following attributes define the Base Plate 1 and Bolt 1 attributes of a Base Support data driven assembly:

Attribute Name

Description

Implementation Details

IJUAhsBasePlate1::
BasePlate1Part

Specifies the part number or the part class of the base plate on Leg1.

To select the part number using BasePlate1Rule, do not specify any value for this property.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

The pipe attachment is an optional part. If you do not require a pipe attachment, do not specify a value.

IJUAhsBasePlate1Rl::
BasePlate1Rule

Specifies the hgrSupportRule that returns the plate part number.

The hanger rule must be the name of an existing rule in the catalog.

To select the part number using BasePlate1Part, do not specify any value for this property.

IJUAhsBasePlate1Ang::
BasePlate1Angle

Specifies the angle at which the BasePlate1Part rotates about the port z-axis. The plate is attached to the z-axis.

IJUAhsBasePlate1Off::
BasePlate1Offset

Specifies the distance by which the base plate must be offset from Leg1.

1 - Center of base plate to center of vertical parts

Base Support - Base Plate 1 & Bolt 1 - Base Plate1Offset - 1

2 - Edge of base plate to center of vertical parts

Base Support - Base Plate 1 & Bolt 1 - Base Plate1Offset - 2

IJUAhsBasePlate1OffDef::
BasePlate1OffsetDef

Specifies how to measure the BasePlate1Offset.

IJUAhsBeamClamp::BeamClampPart

Specifies the part number or a part class for a BeamClamp that is used for the support.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

BeamClamp is an optional part.

IJUAhsBeamClampRl::BeamClampRule

Specifies the hgrSupportRule that returns the part number of BeamClamp. The hanger rule must be the name of an existing rule in the catalog.

IJUAhsMulti1::Multi1Qty

Specifies the quantity of BeamClamps.

Refer to MultiLocate attributes in Common section for Multi1Qty, Multi1LocateBy and Multi1Location information.

IJUAhsMulti1::Multi1LocateBy

Specifies the location of BeamClamps. Each BeamClamp can be located in two ways:

1 - Relative to center of the group

2 – Relative to Edge.

IJUAhsMulti1::Multi1Location

Specifies the spacing of the location based on the LocateBy attribute.

IJUAhsBolt1::Bolt1Part

Specifies the part number or the part class of the bolts that are connected to BasePlate1.

To select the part number using Bolt1Rule, do not specify any value for this property.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

The bolt attachment is an optional part. If you do not require a pipe attachment, do not specify a value.

IJUAhsBolt1Rl::Bolt1Rule

Specifies the hgrSupportRule that returns the plate part number.

The hanger rule must be the name of an existing rule in the catalog.

To select the part number using Bolt11Part, do not specify any value for this property.

IJUAhsBolt1Qty::
Bolt1Quantity

Specifies the number of bolts to include for BasePlate1.

Base Support - Base Plate 1 & Bolt 1 - Bolt1Quantity

IJUAhsIncludeAnchor::
IncludeAnchor

Specifies whether to include the anchor bolts or not.