Shear Lug Attributes - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

The following attributes are used to define the attributes of a Shear Lug support. For more information on how to use the attributes, see Shear Lug Attributes:

Attribute Name

Description

Implementation Details

IJUAhs_ShearLugQty::
ShearLugQty

Specifies the quantity of shear lug parts to include in the support.

IJUAhs_ShearLugQtyRl::
ShearLugQtyRule

Specifies a hgrSupportRule that returns sheer lug quantity. The hanger rule must exist in the catalog and must be a rule name.

IJUAhs_ShearLugOffset::
ShearLugOffset

IJUAhs_ShearLugOffsetRl::
ShearLugOffsetRule

IJUAhs_ShearLugOffsetDef::
ShearLugOffsetDef

Specifies the offset for the shear lug.

Definition values:

1 - Offset from Clamp

2 - Offset from Shield

3 - Offset from Shield 2

IJUAhs_ShearLugOffsetRl::
ShearLugOffsetRule

Specifies a hgrSupportRule that returns offset for the sheer lug. The hanger rule must exist in the catalog and must be a rule name.

IJUAhs_ShearLugOffsetDef::
ShearLugOffsetDef

Specifies how the offset must be measured.

Definition values:

1 - Offset from Clamp

2 - Offset from Shield

3 - Offset from Shield 2

IJUAhs_ShearLugRot::
ShearLugRotation

Specifies the number of degrees a sheer lug is rotated around the pipe from the default placement position.

The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook; otherwise specify the units.

Example: 100 deg, 100rad.

IJUAhs_ShearLugRotRl::
ShearLugRotationRule

Specifies a hgrSupportRule that returns the value for SheerLugRotation.

The hanger rule must exist in the catalog and must be a rule name.

Rule Name: ShearLugRotationBySize

IJUAhs_ShearLugLen::
ShearLugLength

Specifies the length of the sheer lug.

The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook; otherwise, specify the units.

Example: 100 mm, 100 in.

IJUAhs_ShearLugLenRl::
ShearLugLenRule

Specifies a hgrSupportRule that returns the value for SheerLugLength.

The hanger rule must exist in the catalog and must be a rule name.

Rule Name: ShearLugLengthBySize

IJUAhs_ShearLugLoc::
ShearLugLocation

Specifies the codelist value that defines where to position the shear lugs.

Location values:

1 - Top

2 - Bottom

3 - Both

IJUAhs_ShearLugThk::
ShearLugThk

Specifies the thickness of shear lug.

The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook; otherwise specify the units.

IJUAhs_ShearLugThkRl::
ShearLugThkRl

Specifies a hgrSupportRule that returns the value for SheerLugThk.

The hanger rule must exist in the catalog and must be a rule name.

Rule Name: ShearLugThkBySize

IJUAhs_ShearLugWidth::
ShearLugWidth

Specifies the width of the shear lug.

The default units are specified in the CustomInterface worksheet of the HS_S3DAssy workbook; otherwise, specify the units.

IJUAhs_ShearLugWidthRl::
ShearLugWidthRule

Specifies a hgrSupportRule that returns the value for SheerLugWidth.

The hanger rule must exist in the catalog and must be a rule name.

Rule Name: ShearLugWidthBySize