Double Cantilever Attributes - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

A Combined Frame support uses the following attributes irrespective of the secondary supports and parts that are included.

Attribute Name

Description

Implementation Details

IJUAhsSpacing1::
FrameSpacing1

IJUAhsSpacing1Rl::
FrameSpacing1Rule

Specifies the space between the placement point and the center line of Frame1 assembly.

IJUAhsSpacing2::
FrameSpacing2

IJUAhsSpacing2Rl::
FrameSpacing2Rule

Specifies the space between the placement point and the center line of Frame2 assembly.

IJUAhsCross1Ang::
Cross1Orientation

IJUAhsCross2Ang::
Cross2Orientation

Specifies the angle of rotation for Cross1 or Cross2 steel part.

Because Cross1 is mirrored, the angle is about the axis of Cross1/2 in the opposite direction.

hsSteelOrientationAngle

Cross1:

Cross2:

IJUAhsCross1BOH::
Cross1BeginOverhang

IJUAhsCross1BOHRl::
Cross1BeginOverhangRule

Specifies the begin overhang of Cross1 steel part.

IJUAhsCross1EOH::
Cross1EndOverhang

IJUAhsEOHRl::
Cross1EndOverhangRule

Specifies the end overhang of Cross1 steel part.

IJUAhsCross2BOH::
Cross1BeginOverhang

IJUAhsCross2BOHRl::
Cross1BeginOverhangRule

Specifies the begin overhang of Cross2 steel part.

IJUAAhsCross2EOH::
Cross1EndOverhang

IJUAhsEOHRl::
Cross2EndOverhangRule

Specifies the end overhang of Cross2 steel part.

IJUAhsCross1BOHSel::
Cross1BeginOverhangSel

IJUAhsCross1EOHSel::
Cross1EndOverhangSel

Specifies the codelist value that determines the selection of the begin/end overhang on Cross1/Cross2.

This attribute uses hsSelection codelist values from the HS_S3DAssy_Codelist.xls workbook.

hsSelection:

  1. By Rule. Uses the rule to obtain the value.

  2. By Input. Uses the value directly.

IJUAhsCross1BOHDef::
Cross1BeginOverhangDef

IJUAhsCross1EOHDef::
Cross1EndOverhangDef

IJUAhsCross2BOHDef::
Cross2BeginOverhangDef

IJUAhsCross2EOHDef::
Cross2EndofOverhangDef

Specifies the value that measures Begin/End Overhang of Cross1/Cross2 on Frame1 / Frame2 assembly.

The supported values are:

1 = Outside edge of the frame support

2 = Center of the frame support

3 = Inside edge of the frame support

IJUAhsCross2BOHSel::Cross2BeginOverhangSel

IJUAhsCross2EOHSel::

Cross2EndOverhangSel Specifies the codelist value that determines the selection of the begin/end overhang on Cross1/Cross2.

This attribute uses hsSelection codelist values from the HS_S3DAssy_Codelist.xls workbook.

hsSelection:

  1. By Rule. Uses the rule to obtain the value.

  2. By Input. Uses the value directly.

IJUAhsCross1Off::
Cross1Offset

IJUAhsCross1OffRl::
Cross1OffsetRule

Specifies the offset of Cross1 steel part from the edge of Frame1 Member1 steel part or the edge of the bounding box.

IJUAhsCross2Off::
Cross2Offset

IJUAhsCross2OffRl::
Cross2OffsetRule

Specifies the offset of Cross2 steel part from the edge of Frame1 Member1 steel part or the edge of the bounding box.

IJUAhsCross1OffDef::
Cross1OffsetDefinition

Specifies the value that measures Cross1Offset between the far side of Cross1 and the far side edge of Frame1 assembly from the supporting object (structure).

The supported values are:

1 = From edge of Frame1

IJUAhsCross2OffDef::
Cross2OffsetDefinition

Specifies the value that measures Cross2Offset between the near side of Cross2 and the near side edge of Frame1 assembly from the supporting object (structure).

The supported values are:

1 = From edge of Frame1

IJYAhsWeldCross1B:
WeldCross1Begin

IJUAhsWeldCross1BRl::
WeldCross1BeginRule

IJUAhsWeldCross1E::
WeldCross1End

IJUAhsWeldCross1ERl::
WeldCross1EndRule

IJUAhsWeldCross2B::
WeldCross2Begin

IJUAHsWeldCross2BRl::
WeldCross2BeginRule

IJUAhsWeldCross2E::
WeldCross2End

IJUAhsWeldCross2ERl::
WeldCross2EndRule

Specifies the weld part number between Cross1 or Cross2 and Frame1 assembly.

IJUAhsSuppPosOffset::SupPosOff

Specifies the support distance from origin of the support. To determine the support position offset using SupPosOff, do not type any value for this property.

combined_frames1

IJUAhsSuppPosOffsetRl::SupPosOffRl

Defines a HgrSupportRule that returns the support position offset. The hanger rule name or the ProgID must exist in the catalog. To determine the support position using SupPosOff, do not type any value for this property.