The Combined Base Plate uses all the General Attributes specified in Common Attributes section.
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsLeg1::Leg1Part |
Specifies the part number or the part class of the first leg. |
Leg 1 is a mandatory part. You must specify either Leg1Part or Leg1Rule. |
IJUAhsLeg1Rl::Leg1Rule |
Defines an HgrSupportRule that returns a rich hanger beam part number. To select the part number using Leg1Part, do not type any value for this property. |
|
IJUAhsLeg2::Leg2Part |
Specifies the part number or the part class of the second leg. |
Leg 1 is a mandatory part. You must specify either Leg1Part or Leg1Rule. |
IJUAhsLeg2Rl::Leg2Rule |
Defines an HgrSupportRule that returns a rich hanger beam part number. To select the part number using Leg2Part, do not type any value for this property. |
|
IJUAhsAngConn1::AngConn1Part |
Specifies the part number or the part class of a Plate part to use for a support. |
The Angle connector used to connect the two steels at corners. |
IJUAhsAngConn1Rl::AngConn1Rule |
Defines an HgrSupportRule that returns a part number or part class to use for the cap plate. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the part directly using AngConn1Part, do not type any value for this property. AngConn1PartRule can also be used to specify a custom part selection rule. If both CapPlate1Part and AngConn1PartRule are populated, then it is assumed that AngConn1PartRule is a part selection rule, which is then used to override the default part selection rule defined in the catalog for the part class specified in AngConn1Part. |
|
IJUAhsMember1:: Member1Part |
Specifies the part number or the part class of the first member. The horizontal member. |
Leg 1 is a mandatory part. You must specify either Member1Part or Member1Rule. |
IJUAhsMember1Rl::Member1Rule |
Defines an HgrSupportRule that returns a rich hanger beam part number. To select the part number using Member1Part, do not type any value for this property. |
|
IJUAhsMember2::Member2Part |
Specifies the part number or the part class of the first member. The lower horizontal member. |
Leg 1 is a mandatory part. You must specify either Member2Part or Member2Rule. |
IJUAhsMember2Rl::Member2Rule |
Defines an HgrSupportRule that returns a rich hanger beam part number. To select the part number using Member2Part, do not type any value for this property. |
|
IJUAhsFrPipeAtt1::PipeAtt1Part |
Specifies the pipe attachment part. |
|
IJUAhsFrPipeAtt1Rl::PipeAtt1Rule |
Defines an HgrSupportRule that returns a rich hanger beam part number. To select the part number using PipeAtt1Part, do not type any value for this property. |
|
IJUAhsFrPipeAtt2::PipeAtt2Part |
Specifies the pipe attachment part. |
|
IJUAhsFrPipeAtt2Rl::PipeAtt2Rule |
Defines an HgrSupportRule that returns a rich hanger beam part number. To select the part number using PipeAtt1Part, do not type any value for this property. |
This support needs bolts for angle connectors we are adding the bolts as implied parts. These implied parts are visible in supports hierarchy in work spare explorer but not appear in the model.