Part Attributes - Intergraph Smart Reference Data Standard Database - Version 12.1 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.1

The following attributes define the Cradle Shoe data driven assembly:

Attribute Name

Description

Implementation Details

IJUAhsPlate1::

Plate1Part

Specifies the plate Smartparts part number or a part class that is used for the support.

Option 1 - Specify a part number or part class directly.

Option 2 - Use HgrRule to get the part.

Plate1Part is mandatory.

You must specify either a Plate1Part or Plate1Rule.

IJUAhsPlate1::

Plate1Rule

Specifies the hgrSupportRule that returns the part number for a hanger beam pipe. The hanger rule must be the name of an existing rule in the catalog.

IJUAhsBasePlateThick::

BasePlateThick

Specifies the base plate thickness.

Option 1 - Specify a base plate thickness directly.

Option 2 - Use HgrRule to get the part.

IJUAhsBasePlateThickRl::

BasePlateThickRl

Specifies the hgrSupportRule that returns the thickness of baseplate. The Hanger Rule must exist in the catalog and must be a rule Name.

IJUAhsVertPlateThick::

VertPlateThick

Specifies the vertical plate thickness.

Option 1 - Specify a vertical plate thickness directly.

Option 2 - Use HgrRule to get the part.

IJUAhsVertPlateThickRl::

VertPlateThickRl

Specifies the hgrSupportRule that returns the thickness of vertical plate. The hanger rule must be the name of an existing rule in the catalog.

IJUAhs_VerQty::VerQty

Specifies the quantity of vertical plates. (Max value is 2)

Refer to MultiLocate attributes in Common section for Multi1Qty, Multi1LocateBy and Multi1Location information.

IJUAhs_VerQtyRl::VerQtyRule

A hgrSupportRule that returns the quantity of vertical plates. The Hanger Rule must exist in the catalog and must be a rule Name.

IJUAhs_VerQtyLocateBy::

VerQtyLocateBy

Specifies the location of vertical plates. Each vertical plate can be located in two ways:

1 - Relative to center of the group

2 – Relative to Edge.

IJUAhs_VerQtyLocation::

VerQtyLocation

Specifies the spacing of the location based on the LocateBy attribute.

IJUAhsVertPlInset::

VertPlateInset

Specifies the distance by which the vertical plate must get trimmed from edges of base plate. For a given value the vertical plate will be trimmed on the both sides.

IJUAhsRibPlateThick::

RibPlateThick

Specifies the thickness of the rib plate

IJUAhsRibPlateThickRl::

RibPlateThickRl

A hgrSupportRule that returns the rib plate thickness. The Hanger Rule must exist in the catalog and must be a rule Name.

IJUAhs_RibQty::RibQty

Specifies the quantity of rib plates.

Refer to MultiLocate attributes in Common section for Multi1Qty, Multi1LocateBy and Multi1Location information.

IJUAhs_RibQtyRl::RibQtyRule

A hgrSupportRule that returns the quantity of rib plates. The Hanger Rule must exist in the catalog and must be a rule Name.

IJUAhs_RibQtyLocateBy::

RibQtyLocateBy

Specifies the location of rib plates. Each rib plate can be located in two ways:

1 - Relative to center of the group

2 – Relative to Edge.

IJUAhs_RibQtyLocation::

RibQtyLocation

Specifies the spacing of the location based on the LocateBy attribute.

IJUAhsStiffPlateThick::

StiffPlateThick

Specifies the thickness of the stiffener plate

IJUAhsStiffPlateThickRl::

StiffPlateThickRl

A hgrSupportRule that returns the stiffener plate thickness. The Hanger Rule must exist in the catalog and must be a rule Name.

IJUAhs_StiffQty::StiffQty

Specifies the quantity of stiffener plates.

Refer to MultiLocate attributes in Common section for Multi1Qty, Multi1LocateBy and Multi1Location information.

IJUAhs_StiffQtyRl::StiffQtyRule

A hgrSupportRule that returns the quantity of stiffener plates. The Hanger Rule must exist in the catalog and must be a rule Name.

IJUAhs_StiffQtyLocateBy::

StiffQtyLocateBy

Specifies the location of stiffener plates. Each stiffener plate can be located in two ways:

1 - Relative to center of the group

2 – Relative to Edge.

IJUAhs_StiffQtyLocation::

StiffQtyLocation

Specifies the spacing of the location based on the LocateBy attribute.

IJUAhsCurvStiffener::

CurveStiffener

Specifies whether the stiffener plate is curved or not.

Use the following values:

1-True

0-False