Riser Lug Attributes - Intergraph Smart Reference Data Standard Database - Version 12.2 - Help - Hexagon PPM

Standard Database for Intergraph Smart Reference Data Hangers and Supports Help

Language
English
Product
Intergraph Smart Reference Data Standard Database
Search by Category
Help
Standard Database for Smart Reference Data Version
12.2

Name

User Name

OA

Category

On Property Page

Read Only

RiserLugQty

Riser Lug Quantity

Yes

Standard

Yes

No

RiserLugQtyRule

Riser Lug Quantity Rule

No

Standard

No

Yes

RiserLugOffset

Riser Lug Offset

Yes

Dimensions

Yes

No

RiserLugOffsetRule

Riser Lug Offset Rule

No

Standard

No

Yes

RiserLugOffsetDef

Riser Lug Offset Def

No

Standard

No

Yes

RiserLugRotation

Riser Lug Rotation

Yes

Dimensions

Yes

No

RiserLugRotationRule

Riser Lug Rotation Rule

No

Standard

No

Yes

RiserLugLength

Riser Lug Length

No

Standard

No

Yes

RiserLugLengthRule

Riser Lug Length Rule

No

Standard

No

Yes

RiserLugHeight

Riser Lug Height

Yes

Dimensions

Yes

No

RiserLugHeightRule

Riser Lug Height Rule

No

Standard

No

Yes

Attribute Name

Description

Implementation Details

IJUAhs_RiserLugQty::
RiserLugQty

Specifies the number of riser lugs to be included in the support.

The value must be an integer.

IJUAhs_RiserLugQtyRl:: RiserLugQtyRule

Specifies the hgrSupportRule that returns the number of riser lugs to be used in the support.

The hanger rule must be the name of an existing rule in the catalog.

To select the part number using RiserLugQty, do not specify any value for this property.

For example:

Rule Name: RiserLugQtyByPipeDia

Rule ProgID: HS_S3DRules.RiserLugQtyByPipeDia

IJUAhs_RiserLugOffset:: RiserLugOffset

Specifies the offset for the riser lug.

If a clamp is available, the software bases the offset on the clamp position.

If a clamp is not available, the software offsets other parts depending on the riser lug position.

The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise, specify the units.

For example, 200, 200mm, 250in.

IJUAhs_RiserLugOffsetRl:: RiserLugOffsetRule

Specifies the hgrSupportRule that returns the offset for the riser lug

The hanger rule must be the name of an existing rule in the catalog.

To select the part number using RiserLugOffset, do not specify any value for this property.

For example:

Rule Name: RiserLugOffsetByPipeDia

Rule ProgID: HS_S3DRules.RiserLugOffsetByPipeDia

IJUAhs_RiserLugOffsetDef:: RiserLugOffsetDef

Defines the riser lug offset and determines how to measure the attachment.

If you set a value for RiserLugOffset but do not specify a definition, the software displays an error message.

1 - Offset from center

If clamp is available:

Riser - Riser Lug Attributes - RiserLugOffsetDef - 1-1

If a clamp is not available:

Riser - Riser Lug Attributes - RiserLugOffsetDef - 1-0

2 - Offset bottom of riser lug from lower edge of clamp

Riser - Riser Lug Attributes - RiserLugOffsetDef - 2-1

2 - Offset top of riser lug from upper edge of clamp

Riser - Riser Lug Attributes - RiserLugOffsetDef - 2-2

IJUAhs_RiserLugRot:: RiserLugRotation

Specifies the angle of rotation for the riser lug around the pipe from the default placement position.

The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise, specify the units.

For example, 100 deg, 200 rad.

IJUAhs_RiserLugRotRl:: RiserLugRotationRule

Specifies the hgrSupportRule that returns the angle of rotation for riser lug.

The hanger rule must be the name of an existing rule in the catalog.

To select the part number using RiserLugRotation, do not specify any value for this property.

For example:

Rule Name: RiserLugRotationBySize

Rule ProgID: HS_S3DRules.RiserLugRotationBySize

IJUAhs_RiserLugLen:: RiserLugLength

Specifies the length of the riser lug.

The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook, else specify the units.

For example, 100 deg, 200 rad.

RiserLug changes only the length of the vertical plate.

Riser - Riser Lug Attributes - RiserLugLength - RiserLug

Shoe changes the length of the shoe.

Riser - Riser Lug Attributes - RiserLugLength - Shoe

IJUAhs_RiserLugLenRl:: RiserLugLengthRule

Specifies the hgrSupportRule that returns the length of the riser lug.

The hanger rule must be the name of an existing rule in the catalog.

To select the part number using RiserLugLength, do not specify any value for this property.

For example:

Rule Name: RiserLugLengthBySize

Rule ProgID: HS_S3DRules.RiserLugLengthBySize

IJUAhs_RiserLugHeight:: RiserLugHeight

Specifies the height of the riser lug.

The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook; otherwise specify the units.

For example, 100 deg, 200 rad.

RiserLug changes only the height of the vertical plate.

Riser - Riser Lug Attributes - RiserLugHeight - RiserLug

Shoe changes the length of the shoe.

Riser - Riser Lug Attributes - RiserLugHeight - Shoe

IJUAhs_RiserLugHeightRl:: RiserLugHeightRule

Specifies the hgrSupportRule that returns the height of the riser lug.

The hanger rule must be the name of an existing rule in the catalog.

To select the part number using RiserLugHeight, do not specify any value for this property.

For example:

Rule Name: RiserLugHeightBySize

Rule ProgID: HS_S3DRules.RiserLugHeightBySize