Name |
User Name |
OA |
Category |
On Property Page |
Read Only |
---|---|---|---|---|---|
ClampOffset |
Clamp Offset |
Yes |
Dimensions |
Yes |
No |
ClampOffsetRule |
Clamp Offset Rule |
No |
Standard |
No |
Yes |
ClampRotation |
Clamp Rotation Angle |
Yes |
Dimensions |
Yes |
No |
ClampRotationRule |
Clamp Rotation Rule |
No |
Standard |
No |
Yes |
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhs_ClampOffset:: |
Specifies the offset for the clamp from the default placement position. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook. Otherwise, specify the units. For example, 200, 200mm, 20in. |
IJUAhs_ClampOffsetRl:: |
Specifies the hgrSupportRule that returns the value for clamp offset. The hanger rule must be the name of an existing rule in the catalog. To select the part number using ClampOffset, do not specify any value for this property. |
For example: Rule Name: ClampOffsetBySize Rule ProgID: HS_S3DRules.ClampOffsetBySize |
IJUAhs_ClampRot:: |
Specifies the angle of rotation for the clamp around the pipe from the default placement position. |
The default units are specified in the CustomInterfaces worksheet of the HS_S3DAssy workbook. Otherwise, specify the units. For example, 100 deg, 150 rad. |
IJUAhs_ClampRotRl:: |
Specifies the hgrSupportRule that returns the angle of rotation for the clamp. The hanger rule must be the name of an existing rule in the catalog. To select the part number using ClampRotation, do not specify any value for this property. |
For example: Rule Name: ClampRotationBySize Rule ProgID: HS_S3DRules.ClampRotationBySize |