The assemblies in the SDB package use the following general attributes:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsSupportNumber:: |
Specifies the support detail number as defined in the support specification. The default BOM function uses this value to generate the BOM description for the support. |
For example, ABS-01, SH-02, and so on. |
IJUAhsSupportOrient:: |
Specifies how the support must be oriented with respect to the supporting object. |
The following codelist values from hsSupPipeOrientation of HS_S3DAssy_Codelist workbook are acceptable: 1 - Slope - Support orientates directly with the supporting object. Direct orientation to planar object 2 - Orthogonal - Support orientates orthogonally with global Z-axis. Orthogonal orientation to planar object |
IJUAhsIncElevCO:: |
Specifies whether to include the elevation callout in the support. The callout for the elevation is on a label on the fabrication drawing. |
True - include callout False - exclude callout |
IJUAHgrDrawingTemplate:: |
Specifies the drawing template to use for the support. |
|
IJUAHgrRulePriority:: |
Sorts the supports returned by the Assembly Selection Rule shown in the Type list. |
|
IJUAhsValidation:: |
Specifies the hgrSupportRule that validates the state of the support and raises any custom warnings or errors to the user. You can customize the validation rules based on the support. The default ShoeValidationRule provides an example to check the insulation thickness and Limit Stop gaps. If you do not require any validation rule, do not enter any property. |
MultiLocate Attributes
IJUAhsMulti1::Multi1Qty |
Specifies the quantity of BeamClamps. |
Valid Multi1Qty, Multi1LocateBy, Multi1Location cases: |
IJUAhsMulti1::Multi1LocateBy |
Specifies the location of BeamClamps. Each BeamClamp can be located in two ways:
|
|
IJUAhsMulti1::Multi1Location |
Specifies the spacing of the location based on the LocateBy attribute. |