BasePlate1 and Bolt1 Attributes - Intergraph Smart Reference Data Standard Database - Version 12.2 - Help - Hexagon PPM

IJUAhsBasePlate1::
BasePlate1Part

Specifies the part number or the part class of the Base Plate on leg1.

Base plate are optional parts. To exclude a base plate, do not enter any values for these attributes.

IJUAhsBasePlate1Rl::BasePlate1Rule

Defines an HgrSupportRule that returns a part number or part class to use for the base plate. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the part directly using BasePlate1Part, do not type any value for this property.

IJUAhsBasePlate1Ang::
BasePlate1Angle

Specifies the angle of rotation for the BasePlate1Part about the z-axis of the port to which the plate is attached.

IJUAhsBasePlate1Off::
BasePlate1Offset

Specifies the distance by which the base plate must be offset from leg1.

BasePlate1Offset applies only when the StructureConnection is set either to Lapped or Lapped-Opposite.

IJUAhsBasePlate1OffDef::BasePlate1OffsetDef

Defines how BasePlate1Offset is measured. BasePlate1OffsetDef specifies the distance between the base plate and leg1.

IJUAhsBolt1::Bolt1Part

Specifies the part number or the part class of the bolts connected to BasePlate1.

Pipe attachment is an optional part.To exclude a pipe attachment, do not enter any value for these attributes.

IJUAhsBolt1Rl::Bolt1Rule

Defines an HgrSupportRule that returns a part number or the part class to use for the Bolts. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the part directly using Bolt1Part, do not type any value for this property.

IJUAhsBolt1Qty::
Bolt1Quantity

Specifies the number of bolts to include on BasePlate1.

IJUAhsBolt1Offset1::Bolt1Offset1

Specifies the offset of the bolts from the center of plate.

IJUAhsFrGrout::GroutPart

Specifies the part number or the part class of grout1 on leg1.

IJUAhsFrGroutRl::GroutRule

Defines the HgrSupportRule that returns a part number or part class to use for the grout.

The hanger rule must exist in the catalog; it can be a rule name or a ProgID.

To select the part directly using GroutPart1, do not type any value for this property.

IJUAhsFrGroutTh::GroutThickness

Specifies the grout plate thickness value.

IJUAhsFrGrout2::Grout2Part

Specifies the part number or the part class of grout2 on leg2.

IJUAhsFrGrout2Rl::Grout2Rule

Defines the HgrSupportRule that returns a part number or part class to use for the grout.

The hanger rule must exist in the catalog; it can be a rule name or a ProgID.

To select the part directly using GroutPart2, do not type any value for this property.

IJUAhsFrGrout2Th::Grout2Thickness

Specifies the grout plate thickness value.

IJUAhsStiffener::StiffenerPart

Specifies the part number or the part class of the stiffener part.

IJUAhsStiffenerRl::StiffenerRule

Defines the HgrSupportRule that returns a part number or part class to use for the stiffener.

The hanger rule must exist in the catalog; it can be a rule name or a ProgID.

To select the part directly using StiffenerPart, do not type any value for this property.