IJUAhsSupportNumber::SupportNumber - Defines the support detail number as specified in the support specification. This value is used by the default BOM function when generating the BOM Description for the support.
IJUAhsSteelStandard::SteelStandard - Defines the steel standard used by the support. If there are any external rules for the steel section, this attribute is used to determine standard to use.
IJUAhsFrameType::FrameType - Defines the type of the frame shape. This attribute is used by the rules to determine the support frame type. You can add additional code-List values as required. The accepted values from the hsFrameType codelist in the HS_S3DAssy_Codelist.xls workbook areshown below:
-
9 - Cantilevers
-
10 - Braced Cantilevers
IJUAhsFrameOrientation::FrameOrientation - Defines the frame support orientation with respect to the supporting object or the global coordinate system. The accepted values from the hsFrameOrientation codelist in the HS_S3DAssy_Codelist.xls workbook are shown below:
-
1 - Direct Orientation
-
2 -Orthogonal Orientation
-
3 - Tangent Orientation
IJUAhsMirrorFrame::MirrorFrame - Mirrors the frame about the bounding box. The accepted codelist values areshown below:
-
0 - False
-
1 - True
IJUAhsIncludeInsulation::IncludeInsulation - Specifies whether the frame should adjust its size to include pipe insulation.
-
0 - False
-
1 - True
IJUAhsStructureConn::StructureConnection - Specifies how the hanger beam part is connected to the structure. The accepted codelist values areshown below:
-
1 - Normal
-
2 - Lapped
-
3 - Lapped-Opposite
IJUAhsJointValRl::JointValidationRule - Defines an HgrSupportRule that returns a true or false. It will beused validate the part properties like plate/stiffeners. Parts/supports properties can be set without changing the SDB supports code.