Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsBasePlate1:: |
Specifies the part number or the part class of the Base Plate on leg1. |
Base plate are optional parts. To exclude a base plate, do not enter any values for these attributes. |
IJUAhsBasePlate1Rl::BasePlate1Rule |
Defines an HgrSupportRule that returns a part number or part class to use for the base plate. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To select the part directly using BasePlate1Part, do not type any value for this property. |
|
IJUAhsBasePlate1Ang:: |
Specifies the angle of rotation for the BasePlate1Part about the z-axis of the port to which the plate is attached. |
|
IJUAhsBasePlate1Off:: |
Specifies the distance by which the base plate must be offset from leg1. BasePlate1Offset applies only when the StructureConnection is set either to Lapped or Lapped-Opposite. |
|
IJUAhsBasePlate1OffDef::BasePlate1OffsetDef |
Defines how BasePlate1Offset is measured. BasePlate1OffsetDef specifies the distance between the base plate and leg1. |
|
IJUAhsBolt1::Bolt1Part |
Specifies the part number or the part class of the bolts connected to BasePlate1. |
Pipe attachment is an optional part.To exclude a pipe attachment, do not enter any value for these attributes. |
IJUAhsBolt1Rl::Bolt1Rule |
Defines an HgrSupportRule that returns a part number or the part class to use for the Bolts. The hanger rule must exist in the catalog; it can be a rule name or a ProgID. To specify the part directly using Bolt1Part, do not type any value for this property. |
|
IJUAhsBolt1Qty:: |
Specifies the number of bolts to include on BasePlate1. |
BasePlate2 and Bolt2 Attributes
BasePlate2 attributes display similar behavior as that of BasePlate1 attributes.