A Combined Frame support uses the following attributes irrespective of the secondary supports and parts that are included.
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsSpacing1:: IJUAhsSpacing1Rl:: |
Specifies the space between the placement point and the center line of Frame1 assembly. |
|
IJUAhsSpacing2:: IJUAhsSpacing2Rl:: |
Specifies the space between the placement point and the center line of Frame2 assembly. |
|
IJUAhsCross1Ang:: IJUAhsCross2Ang:: |
Specifies the angle of rotation for Cross1 or Cross2 steel part. Because Cross1 is mirrored, the angle is about the axis of Cross1/2 in the opposite direction. |
hsSteelOrientationAngle Cross1: Cross2: |
IJUAhsCross1BOH:: IJUAhsCross1BOHRl:: |
Specifies the begin overhang of Cross1 steel part. |
|
IJUAhsCross1EOH:: IJUAhsEOHRl:: |
Specifies the end overhang of Cross1 steel part. |
|
IJUAhsCross1BOH:: IJUAhsCross1BOHRl:: |
Specifies the begin overhang of Cross2 steel part. |
|
IJUAAhsCross1EOH:: IJUAhsEOHRl:: |
Specifies the end overhang of Cross2 steel part. |
|
IJUAhsCross1BOHSel:: IJUAhsCross1EOHSel:: |
Specifies the codelist value that determines the selection of the begin/end overhang on Cross1/Cross2. This attribute uses hsSelection codelist values from the HS_S3DAssy_Codelist.xls workbook. |
hsSelection: 1- By Rule. Uses the rule to obtain the value. 2 - By Input. Uses the value directly. |
IJUAhsCross1BOHDef:: IJUAhsCross1EOHDef:: IJUAhsCross2BOHDef:: IJUAhsCross2EOHDef:: |
Specifies the value that measures Begin/End Overhang of Cross1/Cross2 on Frame1 / Frame2 assembly. |
The supported values are: 1 = Outside edge of the frame support 2 = Center of the frame support 3 = Inside edge of the frame support |
IJUAhsCross1Off:: IJUAhsCross1OffRl:: |
Specifies the offset of Cross1 steel part from the edge of Frame1 Member1 steel part or the edge of the bounding box. |
|
IJUAhsCross2Off:: IJUAhsCross2OffRl:: |
Specifies the offset of Cross2 steel part from the edge of Frame1 Member1 steel part or the edge of the bounding box. |
|
IJUAhsCross1OffDef:: |
Specifies the value that measures Cross1Offset between the far side of Cross1 and the far side edge of Frame1 assembly from the supporting object (structure). |
The supported values are: 1 = From edge of Frame1 |
IJUAhsCross2OffDef:: |
Specifies the value that measures Cross2Offset between the near side of Cross2 and the near side edge of Frame1 assembly from the supporting object (structure). |
The supported values are: 1 = From edge of Frame1 |
IJYAhsWeldCross1B: IJUAhsWeldCross1BRl:: IJUAhsWeldCross1E:: IJUAhsWeldCross1ERl:: IJUAhsWeldCross2B:: IJUAHsWeldCross2BRl:: IJUAhsWeldCross2E:: IJUAhsWeldCross2ERl:: |
Specifies the weld part number between Cross1 or Cross2 and Frame1 assembly. |
|
IJUAhsSuppPosOffset::SupPosOff |
Specifies the support distance from origin of the support. To determine the support position offset using SupPosOff, do not type any value for this property. |
|
IJUAhsSuppPosOffsetRl::SupPosOffRl |
Defines a HgrSupportRule that returns the support position offset. The hanger rule name or the ProgID must exist in the catalog. To determine the support position using SupPosOff, do not type any value for this property. |