The following attributes are used to define which parts are included in the Single Pipe Wallsupport.
Leg1 Properties
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsLeg1::Leg1Part |
The part number or the part class of the first support leg to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Specify either a Leg1Part or Leg1Rule. |
IJUAhsLeg1Rl::Leg1Rule |
Specifies the hgrSupportRule that returns the part number of the Leg1Part. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsLeg1Ang:: |
Specifies the angle of rotation for the first leg of support. The angle is about the axis of the leg. |
hsSteelOrientalAngle: |
Member1 Properties
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsMember1::Member1Part |
The part number or the part class of the first support member to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Specify either a Member1Part or Member1Rule. |
IJUAhsMember1Rl::Member1Rule |
Specifies the hgrSupportRule that returns the part number of the Member1Part. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsMember1Ang::Member1OrientationAngle |
Specifies the angle of rotation for the first Member of support. |
hsSteelOrientalAngle: |
Member2 Properties
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsMember2::Member2Part |
The part number or the part class of the second support member to use with the support. |
Option 1 - Specify a part number or part class directly. Option 2 - Use HgrRule to get the part. Specify either a Member2Part or Member2Rule. |
IJUAhsMember2Rl::Member2Rule |
Specifies the hgrSupportRule that returns the part number of the Member2Part. The hanger rule must be the name of an existing rule in the catalog. |
|
IJUAhsMember2Ang::Member2OrientationAngle |
Specifies the angle of rotation for the second member of support. |
hsSteelOrientalAngle: |
Single Pipe WallSupport Dimension Attributes
The Single Pipe WallSupport assembly uses the following Input and Output dimensions:
Input Dimensions
You can set default values for the input dimensions. If the attributes are Occurrence Attributes (OA), you can modify the default values in the Support Properties dialog box. Select Dimensions from the Category list on the General tab.
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsFrameOffset1::Offset1Value IJUAhsFrameOffset1Rl::Offset1Rule IJUAhsFrameOffset1Def::Offset1Definition IJUAhsFrameOffset1Sel::Offset1Selection |
Specifies the offset distance from leg to one end of member1. The distance must be a positive value. |
Use the following definitions: 1 - Member to one Edge of Leg1 2 - Member to center of Leg1 3 - Member to other Edge of Leg1 |
IJUAhsFrameOffset2:: Offset2Value IJUAhsFrameOffset2Rl:: Offset2Rule IJUAhsFrameOffset2Sel:: Offset2Selection IJUAhsFrameOffset2Def:: Offset2Definition |
Specifies the offset distance from leg to other end of member1. The distance must be a positive value. |
1 - Member to one Edge of Leg1 2 - Member to center of Leg1 3 - Member to other Edge of Leg1 |
IJUAhsFrameVerticalSpace::VerticalSpaceValue IJUAhsFrameVerticalSpaceRl::VerticalSpaceRule IJUAhsFrameVerticalSpaceDef::VerticalSpaceDefinition IJUAhsFrameVerticalSpaceSel::VerticalSpaceSelection |
Specifies the distance between member1 and member 2. The distance must be a positive value. |
Use the following definitions: 1 – Between inner edges of members 2 - Between centers of members 3 - Between outer edges of members |
Output Dimensions
Smart 3D determines the following output dimension values and displays them as read-only in the property page:
Attribute Name |
Description |
Implementation Details |
---|---|---|
IJUAhsFrameLength1::Length1Value IJUAhsFrameLength1Def::Length1Definition |
Specifies the length of the members. |
Use the following definitions: 1 - Member to one Edge of Leg1 2 - Member to center of Leg1 3 - Member to other Edge of Leg1 4 - Member to other Edge of Leg1 |
IJUAhsFrameLength2::Length2Value IJUAhsFrameLength2Def::Length2Definition |
Specifies the length of the leg. |
Use the following definitions: 1 – Between inner edges of members 2 - Between centers of members 3 - Between outer edges of members |