Elevation Label Command - Intergraph Smart 3D - Help - Hexagon

SmartSketch Drawing Editor Help

Language
English
Product
Intergraph Smart 3D
Subproduct
SmartSketch Drawing Editor
Search by Category
Help
Smart 3D Version
13
SmartSketch Version
11

Pipe BOP places a label that displays the elevation or inverted elevation value of the route object. See Elevation versus Invert Elevation below.

The Pipe BOP is available only if you select one of the following templates:

  • Piping Plan_Routable_Center Elev_M - Select to place a label for the center elevation of the pipe.

  • Piping Plan_Routable_INV Elev_M - Select to place a label for the inverted elevation of the pipe.

  • Piping Plan_Routable_WPBOP Elev_M - Select to place a label for the working point of the pipe.

The following example shows an elevation label being used on a composed drawing. An inverted elevation is placed on a pipeline with the Piping Plan_Routable_INV Elev_M template selected.

Elevation labels support only manual placement and label templates for piping disciplines. To apply these templates to other disciplines, such as HVAC, cable tray, and conduit, modify and use these templates or create a new label template based on these templates.

Elevation versus Inverted Elevation

Inverted elevation is the inside elevation of a pipe, HVAC, cable, or conduit route object. Elevation and inverted elevation can be calculated at following locations:

Location

INV (Inverted Elevation)

Elev (Elevation)

Top

4

Z of route object + (OutDiameter/2 - Thickness)

5

Z of route object + (OutDiameter/2)

Center

3

Z of route object

3

Z of route object

Bottom

2

Z of route object - (OutDiameter/2 - Thickness)

1

Z of route object - (OutDiameter/2)

Leader Point Connection

When you click on the route object the leader point is automatically placed near port point, working point or clipping point, whichever is nearest to where you clicked. For example, if you click at the red point the leader point is moved to nearest clipping point (1). If you click at the green points, the leader point is moved to the nearest working point (2). If you click at the cyan points, then the leader point is moved to nearest port point (3).

What do you want to do?