Fetch a Deleted Drawing - Intergraph Smart P&ID - Help - Intergraph

Before performing this scenario, ensure that you have completed all the prerequisite activities described in Sample Project Workflows.

1. In Drawing Manager, select Project 1 and check out Drawing C from the Plant.

2. Open Drawing C and do the following:

   1. Claim Flow Indicator FI-100.

   2. Change the Tag Sequence Number of the Flow Indicator from 100 to 101.

   3. Exit Drawing C.

      Drawing C becomes Drawing C'.

3. In Project 2, fetch Drawing C from the Plant.

4. Open Drawing C and do the following:

   1. Claim Flow Indicator FI-100.

   2. Change the Tag Sequence Number of the Flow Indicator from 100 to 202.

   3. Exit Drawing C.

      Drawing C becomes Drawing C''.

5. In Project 1, delete Drawing C'.

6. In Project 2, check out Drawing C from the Plant without replacing the existing P&ID.

7. In Project 3, fetch Drawing C'' from Project 2.

8. Open Drawing C'' and do the following:

   1. Add a Generic Tray to the vessel.

   2. Exit Drawing C''.

      Drawing C'' becomes Drawing C'''.

9. In Project 2, undo the check-out of Drawing C''.

10. In Project 3, check out Drawing C from the Plant, ensuring that the existing P&ID is not replaced.

    Drawing C becomes Drawing C''' in Project 3.

11. Open Drawing C''' and do the following:

    1. Claim Flow Indicator FI-202.

    2. Exit Drawing C'''.

       Drawing C''' becomes Drawing C'''' in Project 3.

12. Check in Drawing C''''.

13. In Project 1, click Revisions > Fetch Deleted Drawing and select deleted Drawing C'.

14. Check out Drawing C'''' from the Plant, ensuring that the existing P&ID is not replaced.

    Drawing C'''' becomes Drawing C' in Project 1.

15. Attempt to check in Drawing C'.

    Unclaimed changes prevent check-in.

16. Open Drawing C' and do the following:

    1. Claim the vessel.

    2. Claim Flow Indicator FI-101.

    3. Perform Compare and Refresh for the generic vessel tray.

    4. Exit Drawing C'.

17. Check in Drawing C'.

Key