Verify a Drawing for Checkin - Intergraph Smart P&ID - Help - Intergraph

SmartPlant P&ID Drawing Manager Help

Language
English
Product
Intergraph Smart P&ID
Search by Category
Help
SmartPlant Foundation / SDx Version
Smart P&ID Version
7.1 (2014 R1)
Smart Engineering Manager Version
7.2 (2014 R2)
Smart P&ID Web API Version
(none)
  1. Select the project in the Tree view.

  2. In the List view, select the checked-out drawings that you want to check into the Plant.

  3. Click Project > Verify for Checkin.

  4. On the Verifying Drawings for Checkin dialog box, observe the progress of the verification operations. Click View Log if you want to examine notes on the operation.

When you have verified the drawing for checkin, go ahead and check the drawing into the Plant as soon as possible. Because the verification process does not freeze the drawing state, there is no guarantee that changes are not made to the drawing during any interim time between verification and actual check in. For more information, see Check In a Drawing.

  • You cannot check in a fetched drawing, it must be checked out first. You can, however, check in a new drawing created in the project. For more information about checking out drawings, see Check Out a Drawing.

  • Verifying a drawing for checkin checks exactly the same drawing conditions as the Check In command, but without actually checking the drawing into the Plant.

  • If an invalid claim is found but the item in question matches the item in the Plant, run Verify for Checkin to resolve this situation. This process automatically sets the claim to valid and allows the check in to occur.