Bending file - Intergraph I-Data Integrator - Help - Hexagon PPM

SmartPlant Isometrics I-Data Integrator Help

Language
English
Product
Intergraph I-Data Integrator
Search by Category
Help
I-Data Integrator Version
7.1(2014R1)

If you specify a Bending file in the .FLS file, or a –127 record in the SmartPlant Spoolgen .opt file, the software reads the generated file, consolidates it and then creates three intrinsic recordsets: Bends, CutPieces, and Holes. These can be processed in the same way as other intrinsic recordsets created from the Material Control, Welding, Spool Information or Repeatability files.

Bends Recordset

Field

Description

PIPELINE

Indicates the pipeline reference (*).

SPOOL-ID

Indicates the spool ID (*).

CUT-ID

Indicates the cut piece ID (*).

PIPING-SPEC

Indicates the piping specification (*).

ITEM-CODE

Indicates the pipe item code (*).

ND

Indicates the nominal diameter (*).

UMI

Indicates the generated unique material identifier. Used to link to other tables (*).

NUMBER

Indicates the bend number.

X

Indicates the bend position.

Y

Z

RADIUS

Indicates the bend radius.

ANGLE

Indicates the bend angle.

CutPieces Recordset

Field

Description

PIPELINE

Indicates the pipeline reference (*).

SPOOL-ID

Indicates the spool ID (*).

PIPING-SPEC

Indicates the piping specification (*).

ITEM-CODE

Indicates the item code. (*).

ND

Indicates the nominal diameter (*).

UMI

Indicates the generated unique material identifier. Used to link to other tables (*).

START-X

Indicates the start point.

START-Y

START-Z

FINISH-X

Indicates the end point.

FINISH-Y

FINISH-Z

CUT-ID

Indicates the cut piece ID.

PART-NUMBER

Indicates the part number.

OD

Indicates the outside diameter.

WALL-THICKNESS

Indicates the pipe thickness (if set).

CUT-LENGTH

Indicates the total length.

DEV-LENGTH

Indicates the developed length (allowing for weld gaps, and so on).

START-COMPONENT

Indicates the start component type (flange, for example).

START-COMP-CODE

Indicates the start component item code.

START-COMP-PART-NO

Indicates the part number.

START-COMP-LENGTH

Indicates the length.

START-END-TYPE

Indicates the IDF record number (Flange=105, for example).

FINISH-COMPONENT

Indicates the finish component type (flange, for example).

FINISH-COMP-CODE

Indicates the finish component item code.

FINISH-COMP-PART-NO

Indicates the part number.

FINISH-COMP-LENGTH

Length.

FINISH-END-TYPE

Indicates the IDF record number (Flange=105, for example).

NUM-HOLES-TO-BE-CUT

Indicates the number of holes in cut piece.

Holes Recordset

Field

Description

PIPELINE

Indicates the pipeline reference (*).

SPOOL-ID

Indicates the spool ID (*).

PIPING-SPEC

Indicates the piping specification (*).

ITEM-CODE

Indicates the item code (*).

ND

Indicates the nominal diameter.

UMI

Indicates the generated unique material identifier. Used to link to other tables (*).

HOLE-NUM

Indicates the hole number.

HOLE-COMP-PART-NO

Indicates the part for component with hole.

HOLE-DIAMETER

Indicates the hole diameter.

HOLE-INTSECN- ANGLE

Indicates the intersection angle.

HOLE-CENTRE- OFFSET

Indicates the offset.

HOLE-ROTATION- ANGLE

Indicates the rotation angle.

HOLE-DISTANCE

Indicates the distance from cut piece start.

  • Fields marked with an asterisk ( * ) are always present. Other fields are present depending on the content of the Bending file (which is subject to change). The Bends and Holes recordsets are not created if there are no bends (pulled bends) or holes in the Isogen data.

  • See the Isogen documentation for a full description of these parameters.

See Also

Input Data