Report Options Dialog Box - Intergraph I-Convert - Help - Intergraph Process, Power & Marine Documentation

SmartPlant Isometrics I-Convert Help

Language
English
Product
Intergraph I-Convert
Search by Category
Help
I-Convert Version
7.1(2014R1)

Report Status

Controls report generation. If you select Yes, a report is generated and options on the General tab become available for selection. If you select No, a report is not be generated and options on the General tab are grayed out.

General Tab

Item Code/Bores

Locates matching components by item code and bores. This option is mandatory. After the software finds a matching component, you can report on the following optional checks:

  • End preparation - The end preparation of the components.

  • Item code 2 - The second item codes.

  • Configuration - SmartPlant Isometrics configuration codes.

  • Description - Component descriptions.

  • Dimensions - Dimensions with a user-specified tolerance.

  • Bolts - Turns on and off the bolt checking.

Specific Tab

Omit length from fixed pipe codes

Removes the length from fixed length pipe item codes before finding a matching component.

Display dimensional differences

Displays differences that exist with dimensions.

OK

Accepts all changes and closes the dialog box.

Cancel

Cancels all changes and closes the dialog box.

Apply

Accepts all changes without closing the dialog box.

Defaults

Resets all settings in the dialog box to the stored defaults.

Help

Opens the online documentation displays the Help-related topic.