Generate a Multi-Tag Spec - Intergraph Smart Instrumentation - Training - Intergraph Process, Power & Marine Documentation

You are now going to generate a multi-tag specification for pressure gauge instruments.

1. On the Specifications Module window toolbar, click (Open Spec).

2. On the Open Specification dialog box, do the following:

   1. Under Item type, select Instrument.

   2. Under Item number, type 101-PI -100.

   3. Under Form number, type 8.

   4. Click OK.

3. On the New Specification dialog box, select Create new multi-tag specification.

4. In the Document number box, check for 101-21-100001.

5. From the Format name list, select Pressure Gage SEE LIST.

6. Click OK.

7. In the Select Fluid State pop-up window, select Liquid and click OK.

   In the data page, the fields that you selected to appear on the following page are marked as SEE LIST.

8. Enter the values in the spec sheet fields as shown.

   For the maximum and operating pressure, in the field area, double-click the field to the left of the vertical field separating line and then select bar as the value for Unit and gage as the value for Scale.

   

9. On the toolbar, click (Multiple) to display the Multi-Tag List page.

10. Enter the following information:

    1. In the Service column, increase the column width and type Heat exchanger inlet.

    2. In the Minimum Range column, type 0.

    3. In the Maximum Range column, type 20.

    4. In the Range UOM column, select bar.

11. When done, on the Instrument Specification window toolbar, click .